Shown: Black
Unisex Squad Cadet Quarter-Zip Tech Fleece Pullover
A blank fleece pullover from the Team 365 line, offered in 12 colors and sizes L–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% polyester at 7 oz/yd²
- Fair Labor Association
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 12— Black
Black
Safety Yellow
Sport Athletic Gold
Sport Dark Navy
Sport Forest
Sport Graphite
Sport Light Blue
Sport Maroon
Sport Orange
Sport Purple
Sport Red
Sport Royal
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| L | Low Stock | — | |
| XL | Limited | — | |
| 2XL | Limited | — | |
| 3XL | Low Stock | — | |
| 4XL | Low Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 7 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- L–4XL
- Colors
- 12
- Country of origin
- Cambodia
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes L–4XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|---|
| Body Length | 26 1/2 | 27 1/2 | 28 1/2 | 29 1/2 | 30 1/2 | 31 | 32 | 33 |
| Chest Width (Laid Flat) | 20 | 21 1/2 | 23 | 24 1/2 | 26 | 27 1/2 | 29 | 30 1/2 |
| Sleeve Length | 32 1/2 | 33 1/2 | 34 1/2 | 35 1/2 | 36 1/2 | 37 | 38 | 39 |
Fabric and construction
Manufacturer highlights
- 7 oz/yd² / 240 gsm (US), 11.7 oz/L yd (CA), 100% polyester fleece
- Cationic dyes for superior brightness and color fastness
- Team fit
- Moisture wicking performance pulls sweat away from the skin to keep you dry and comfortable
- Dyed-to-match polyester waffle inserts at sleeves and side panels
- Center front hand warmer pocket
- Center front coil zipper with rubber pull
- Responsible Supplier: this product was made in a facility that is FLA certified
Country of origin
Made in Cambodia.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (6.5 vs 7 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (6.5 vs 7 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (7.4 vs 7 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (7.37 vs 7 oz)
- · Also Excellent for embroidery
Terms used on this page
- Ounces per square yard (oz/yd²)
- Ounces per square yard (oz/yd²) is the US fabric-weight spec printed on nearly every blank’s product page, measuring how many ounces one square yard weighs.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Colorfastness
- Colorfastness is a garment's resistance to fading or transferring color from washing, sunlight, rubbing, or sweat, scored on standardized gray scales from 1 to 5.
- Moisture-Wicking Fabric
- Moisture-wicking fabric, almost always polyester, pulls sweat away from skin to its outer surface for fast evaporation, unlike absorbent cotton.
- Kangaroo Pocket
- A kangaroo pocket is the single front pouch stitched onto a pullover hoodie, and its top edge sets the lower limit for any front print or design.