Shown: Black Heather
Devon & JonesStyle DG798W · Fleece
Women's Newbury Mélange Fleece Quarter-Zip Pullover
A blank fleece pullover from the Devon & Jones line, offered in 3 colors and sizes XS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% polyester at 6.5 oz/yd²
- Fair Labor Association
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— Black Heather
Black Heather
Dark Grey Heather
Navy Heather
Available sizes
Availability — Black Heather
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Limited | — | |
| S | Limited | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | Limited | — | |
| 3XL | Limited | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 6.5 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- XS–3XL
- Colors
- 3
- Country of origin
- Cambodia
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes XS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| Body Length | 24 | 25 | 26 | 27 | 28 | 29 | 30 |
| Chest Width (Laid Flat) | 17 | 18 1/2 | 20 | 22 | 23 1/2 | 25 1/2 | 27 1/2 |
| Sleeve Length | 30 1/2 | 31 1/2 | 32 1/2 | 33 1/2 | 34 1/2 | 35 1/2 | 36 |
Fabric and construction
Manufacturer highlights
- 6.5 oz./yd² / 220 gsm (US), 10.8 oz/Lyd (CA), 100% polyester mélange jersey bonded with fleece
- Lining is 100% polyester fleece
- Two-layer bonded fabric construction for lightweight structure and breathability
- Active fit
- Moisture wicking performance pulls sweat away from the skin to keep you dry and comfortable
- Feminine fit, front and back princess seam
- Center front coil zipper with semi auto lock slider
- Tonal cover stitch details on armholes and shoulder seams
- Front hand-warmer pouch pockets
- Responsible Supplier: this product was made in a facility that is FLA certified
Country of origin
Made in Cambodia.
Shown for the Black Heather colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (6.5 vs 6.5 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (6 vs 6.5 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Also Excellent for embroidery
- · Covers XS–3XL
- · Same fabric: 100% polyester
- · Similar weight (7 vs 6.5 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Moisture-Wicking Fabric
- Moisture-wicking fabric, almost always polyester, pulls sweat away from skin to its outer surface for fast evaporation, unlike absorbent cotton.
- Coverstitch
- Coverstitch hems knit garments using two or three needles and a looper, laying parallel top rows over a stretchy zigzag underside.