Shown: Black Heather
Women's Eclipse Jacquard Polo
A blank polo from the North End line, offered in 4 colors and sizes XS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for screen printing
- 60/40 cotton/recycled polyester at 5 oz/yd²
- Recycled content
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 4— Black Heather
Black Heather
Burgundy Heather
Classic Navy Heather
Platinum Heather
Available sizes
Availability — Black Heather
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Limited | — | |
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | Limited | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 60/40 cotton/recycled polyester
- Fabric weight
- 5 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- XS–3XL
- Colors
- 4
- Country of origin
- India
- Sustainability
- Recycled content; Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Excellent
Cotton-dominant knit takes plastisol and water-based ink cleanly with standard cure settings.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes XS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| Body Length | 24 1/2 | 25 | 26 | 27 | 28 | 29 | 29 1/2 |
| Chest Width (Laid Flat) | 18 1/4 | 19 1/4 | 20 1/4 | 22 1/4 | 23 3/4 | 25 3/4 | 27 3/4 |
| Sleeve Length | 15 1/8 | 15 5/8 | 16 1/4 | 16 7/8 | 17 1/2 | 18 1/8 | 18 5/8 |
Fabric and construction
Manufacturer highlights
- 5 oz./yd² (US), 8.4 oz./L yd (CA), 60/40 cotton/recycled polyester
- Active fit
- Moisture wicking performance pulls sweat away from the skin to keep you dry and comfortable
- Antimicrobial performance properties fight odor-causing bacteria to keep your gear fresher for longer
- Self-fabric collar with integrated collar stand and built in collar stays
- Narrow five-button placket
- Side vents
- Dyed-to-match pearlized buttons
- Responsible Materials: contains recycled polyester
- Responsible Supplier: this product was made in a facility that is FLA certified
Country of origin
Made in India.
Shown for the Black Heather colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 60/40 cotton/recycled polyester
- · Similar weight (5 vs 5 oz)
- · Also Excellent for screen printing
- · Similar fiber mix
- · Similar weight (5.3 vs 5 oz)
- · Also Excellent for screen printing
- · Similar fiber mix
- · Similar weight (5 vs 5 oz)
- · Covers XS–4XL
- · Similar fiber mix
- · Similar weight (4.75 vs 5 oz)
- · Covers S–3XL
Terms used on this page
- Recycled Polyester (rPET)
- Recycled polyester (rPET) is polyester fiber re-extruded from reclaimed plastic, mostly PET bottles, performing like virgin poly while supporting a garment's sustainability claim.
- Moisture-Wicking Fabric
- Moisture-wicking fabric, almost always polyester, pulls sweat away from skin to its outer surface for fast evaporation, unlike absorbent cotton.
- Self-fabric collar
- A self-fabric collar is a polo collar cut from the same piqué or jersey yardage as the shirt body instead of a separately knitted piece.
- Collar stand
- A collar stand is the reinforced band between the neckline seam and the collar fold that holds a shirt or polo collar upright instead of collapsing flat.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.