Shown: Red
Devon & JonesStyle DG200W · Polos
Women's Pima-Tech™ Jet Piqué Polo
A blank polo from the Devon & Jones line, offered in Red and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 53/47 combed pima cotton/polyester at 4.75 oz/yd²
- Fair Labor Association
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Red
Red
Available sizes
Availability — Red
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | — | |
| M | In Stock | — | |
| L | Limited | — | |
| XL | Limited | — | |
| 2XL | Limited | — | |
| 3XL | Low Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 53/47 combed pima cotton/polyester
- Fabric weight
- 4.75 oz/yd²
- Fabric type
- Not stated
- Yarn
- combed
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 1
- Country of origin
- Peru
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 24 | 25 | 26 | 27 | 28 | 28 1/2 |
| Chest Width (Laid Flat) | 18 3/4 | 19 3/4 | 20 3/4 | 21 3/4 | 23 3/4 | 25 3/4 |
| Sleeve Length | 14 1/4 | 15 | 15 3/4 | 16 1/2 | 17 1/8 | 17 3/4 |
Fabric and construction
Manufacturer highlights
- 4.75 oz./yd² (US), 7.9 oz/Lyd (CA), 53/47 combed Pima cotton/polyester
- Moisture-wicking performance
- UPF 30 protection
- Oxford stitch collar
- Two-button placket
- Side vents
- Responsible Supplier: this product was made in a facility that is FLA certified
Country of origin
Made in Peru.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Similar fiber mix
- · Similar weight (5 vs 4.75 oz)
- · Covers XS–4XL
- · Similar fiber mix
- · Similar weight (5 vs 4.75 oz)
- · Covers XS–3XL
- · Similar fiber mix
- · Similar weight (5 vs 4.75 oz)
- · Covers XS–3XL
- · Similar fiber mix
- · Similar weight (5 vs 4.75 oz)
- · Covers S–6XL
Terms used on this page
- Pima Cotton
- Pima cotton is an extra-long-staple cotton variety, with fibers around 1.4 to 1.5 inches, that spins into finer, stronger, silkier yarn than standard upland cotton.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.