Shown: Envy
Next LevelStyle 6021 · Hoodies
Unisex Triblend Hooded Long Sleeve Pullover T-Shirt
A blank hooded sweatshirt from the Next Level line, offered in 15 colors in size XS. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 50/25/25 polyester/cotton/rayon at 4.3 oz/yd²
- Fair Labor Association
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery and Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 15— Envy
Envy
Heather White
Indigo
Macchiatoout of stock
Military Greenout of stock
Premium Heather
Purple Rush
Tahiti Blueout of stock
Venetian Grey
Vintage Black
Vintage Navyout of stock
Vintage Purpleout of stock
Vintage Red
Vintage Royal
Vintage Turquoiseout of stock
Available sizes
Availability — Envy
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Limited | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/25/25 polyester/cotton/rayon
- Fabric weight
- 4.3 oz/yd²
- Fabric type
- Not stated
- Yarn
- 32 singles
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- XS
- Colors
- 15
- Country of origin
- Nicaragua
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes XS.
Garment measurements in inches, laid flat.
| Measurement | XS | S |
|---|---|---|
| Body Length | 27 | 28 |
| Chest Width (Laid Flat) | 16 1/2 | 18 |
| Sleeve Length | 24 1/2 | 25 |
Fabric and construction
Manufacturer highlights
Country of origin
Made in Nicaragua.
Shown for the Heather White colorway; origin can vary by color and production run.
Recommended applications
- Premium merchandise →
Retail-tier cut and hand.
Similar alternatives
- · Similar weight (4.2 vs 4.3 oz)
- · Covers XS–2XL
- · Retail-tier peer
- · Similar fiber mix
- · Similar weight (4.4 vs 4.3 oz)
- · Covers XS–3XL
- · Similar weight (4.3 vs 4.3 oz)
- · Covers XS–2XL
- · Retail-tier peer
- · Similar weight (4.1 vs 4.3 oz)
- · Covers XS–4XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Rayon (Viscose)
- Rayon (viscose) is a semi-synthetic fiber made by dissolving wood pulp cellulose and re-spinning it into filament, prized for a silky drape neither cotton nor polyester can match.
- Singles (Yarn Count)
- Singles is the yarn-count system where a higher number, like 30/1, means finer, thinner yarn, and a lower number, like 18/1, means thicker, coarser yarn.
- Tri-Blend
- Tri-blend fabric mixes cotton, polyester, and rayon in one yarn, producing an especially soft, drapey tee with a naturally heathered, faded print look.
- Ribbed Cuffs
- Ribbed cuffs are the stretch rib-knit bands at the sleeve ends of hoodies and sweatshirts, and their recovery determines whether sleeves keep their shape through daily wear.