Shown: Black
HollowayStyle 222577 · Hoodies
Men's Repreve® Eco Hooded Sweatshirt
A blank hooded sweatshirt from the Holloway line, offered in 8 colors and sizes XS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 50/25/25 recycled polyester/cotton/modal soft knit at 4.4 oz/yd²
- Recycled content
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery and Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 8— Black
Black
Carbon Heather
Navy Heather
Olive Heather
Royal Heather
Scarlet Heather
Storm Heather
White
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Limited | — | |
| S | Limited | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/25/25 recycled polyester/cotton/modal soft knit
- Fabric weight
- 4.4 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tagless
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- XS–3XL
- Colors
- 8
- Country of origin
- Egypt
- Sustainability
- Recycled content
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes XS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| Body Length | 28 1/4 | 29 | 29 3/4 | 30 1/2 | 31 1/4 | 32 | 32 3/4 |
| Chest Circumference | 34 1/2 | 38 1/2 | 42 1/2 | 46 1/2 | 50 1/2 | 54 1/2 | 58 1/2 |
| Sleeve Length | 32 1/4 | 33 1/2 | 34 3/4 | 36 | 37 1/4 | 38 1/2 | 39 3/4 |
Fabric and construction
Manufacturer highlights
- 4.4 oz./yd², 50/25/25 recycled polyester/cotton/modal soft knit
- Made from Repreve® 50% recycled polyester
- Hood with drawcord on S-3XL only
- Pouch pocket
- Set-in sleeves
- Tagless label
- Responsible Materials: contains 50% recycled polyester
Country of origin
Made in Egypt.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Similar weight (4.6 vs 4.4 oz)
- · Covers S–3XL
- · Similar weight (4.4 vs 4.4 oz)
- · Covers S–3XL
- · Similar weight (4.1 vs 4.4 oz)
- · Covers S–4XL
- · Similar fiber mix
- · Covers S–5XL
Terms used on this page
- Recycled Polyester (rPET)
- Recycled polyester (rPET) is polyester fiber re-extruded from reclaimed plastic, mostly PET bottles, performing like virgin poly while supporting a garment's sustainability claim.
- Modal
- Modal is a type of rayon made from beechwood pulp, spun to be stronger and less shrink-prone than standard viscose while staying exceptionally soft against skin.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.
- Heat Transfer Label
- A heat transfer label is a printed neck or care label pressed directly onto fabric with a heat press instead of sewn in as woven or satin tape.