Shown: Black
Unisex Pro-Lock Performance Hooded Long Sleeve T-Shirt
A blank hooded sweatshirt from the AllPro line, offered in 6 colors and sizes XS–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 100% polyester at 4.1 oz/yd²
- 8-size run (XS–4XL)
- OEKO-TEX certified facility
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 6— Black
Black
Charcoal
Heather Steel
Navy
Red
Royal
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | In Stock | Available | |
| S | In Stock | Available | |
| M | In Stock | Available | |
| L | In Stock | Available | |
| XL | In Stock | Available | |
| 2XL | In Stock | Available | |
| 3XL | In Stock | Available | |
| 4XL | Limited | Available |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 4.1 oz/yd²
- Fabric type
- jersey
- Yarn
- Not stated
- Construction
- Side-seamed
- Label
- Tear-away label
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- XS–4XL
- Colors
- 6
- Country of origin
- Bangladesh
- Sustainability
- OEKO-TEX certified facility; Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes XS–4XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|---|
| Body Length | 27 | 28 | 29 | 30 | 31 | 31 3/4 | 32 1/2 | 33 1/4 |
| Chest Width (Laid Flat) | 18 1/2 | 20 | 21 1/2 | 23 | 24 1/2 | 26 | 27 1/2 | 29 1/2 |
| Sleeve Length (From Center Back) | 30 1/2 | 32 | 34 | 35 | 36 | 37 | 37 1/2 | 38 |
Fabric and construction
Manufacturer highlights
- 4.1 oz/sq², 100% polyester interlock jersey
- Lightweight fabric ensures comfort and durability
- Moisture-management properties
- UPF 50+ protection
- Snag-resistant
- Fade-resistant printing surface
- Standard fit
- Full coverage three-piece hood
- Side seams
- Tear away label for comfort and relabeling
About this blank
Pro-Lock collection’s cationic disperse dyed polyester locks in colorfastness to create a bleed-resistant print surface that produces vibrant, crisp graphics
Responsible Supplier: this product was made in a facility that is OEKO-TEX and FLA certified.
Country of origin
Made in Bangladesh.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% polyester
- · Also Excellent for sublimation
- · Covers XS–4XL
- · Same fabric: 100% polyester
- · Similar weight (4.1 vs 4.1 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4.4 vs 4.1 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Also Excellent for sublimation
- · Covers S–5XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Interlock Knit
- Interlock knit is a double-knit fabric formed by interlocking two 1x1 rib layers back-to-back, giving a smooth, identical face on both sides.
- UPF (Ultraviolet Protection Factor)
- UPF rates how much UV radiation a fabric blocks, from 15 (good) to 50+ (excellent, blocking over 97.5% of rays), tested under AATCC 183.
- Snag Resistance
- Snag resistance describes how well a fabric's yarn resists catching and pulling into a loop when it hooks on velcro, nails, or rough surfaces.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.
- Relabeling
- Relabeling is removing a garment's factory tag and sewing or pressing in a custom brand label, the physical step private label requires.