Shown: Black
Unisex Full-Zip Hoodie Sweatshirt
A blank hooded sweatshirt from the LAT line, offered in 8 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 60/40 combed ring-spun cotton/polyester at 7.4 oz/yd²
- OEKO-TEX certified facility
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 8— Black
Black
Coyote Brown
Granite Heather
Mauvelous
Military Green
Natural Heather
Navy
Saltwater
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | In Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 60/40 combed ring-spun cotton/polyester
- Fabric weight
- 7.4 oz/yd²
- Fabric type
- fleece
- Yarn
- combed · ring-spun
- Construction
- Side-seamed
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 8
- Country of origin
- Cambodia, Pakistan
- Sustainability
- OEKO-TEX certified facility
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 27 | 28 | 29 | 30 | 31 | 32 |
| Chest Width (Laid Flat) | 19 1/2 | 21 1/2 | 23 1/2 | 25 1/2 | 27 1/2 | 29 1/2 |
| Sleeve Length | 23 1/2 | 24 | 24 1/2 | 25 | 25 1/2 | 26 |
Fabric and construction
Manufacturer highlights
- 7.4 oz./yd², 60/40 combed ring-spun cotton/polyester
- Granite Heather is 55/45 combed ring-spun cotton/polyester with blended face
- 3-end fleece, 100% cotton face on all solid dyed colors
- Jersey lined hood
- Flat braided drawcord
- Jersey back neck tape
- Back locker patch
- Double needle topstitch at seams
- Ribbed cu?s and bottom band
- Concealed YKK metal zipper with matching twill pull
- Front pouch pockets
- Side seams
- EasyTear™ label
- Responsible Supplier: this product was made in a facility that is OEKO-TEX certified
Country of origin
Made in Cambodia or Pakistan.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 60/40 combed ring-spun cotton/polyester
- · Similar weight (7.4 vs 7.4 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7.5 vs 7.4 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7 vs 7.4 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7.8 vs 7.4 oz)
- · Also Excellent for embroidery
Terms used on this page
- Combed Cotton
- Combed cotton is fiber mechanically combed after carding to remove short fibers and debris, producing a smoother, straighter strand for finer fabric.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Heather Fabric
- Heather fabric is knit or woven from a blend of dyed and undyed fiber, creating a mottled two-tone look that usually signals polyester content.
- Ringspun Cotton
- Ringspun cotton is yarn spun by twisting cotton fibers into a smooth, tightly wound strand, giving fabric a softer hand and finer print surface than open-end cotton.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Double-lined hood
- A double-lined hood has a second layer of fabric sewn inside the outer shell, adding warmth, structure, and often a contrast-color interior.