Shown: Basil
Unisex Heavyweight Hoodie Sweatshirt
A blank hooded sweatshirt from the LAT line, offered in 6 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 60/40 combed ring-spun cotton/polyester at 10 oz/yd²
- OEKO-TEX certified facility
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 6— Basil
Basil
Black
Coyote Brown
Granite Heather
Natural
Navy
Available sizes
Availability — Basil
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 60/40 combed ring-spun cotton/polyester
- Fabric weight
- 10 oz/yd²
- Fabric type
- fleece
- Yarn
- combed · ring-spun
- Construction
- Side-seamed
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Oversized
- Sizes
- S–3XL
- Colors
- 6
- Country of origin
- Cambodia, Pakistan
- Sustainability
- OEKO-TEX certified facility
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Oversized fit, cut for unisex wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 27 | 28 | 29 | 30 | 31 | 32 |
| Chest Width (Laid Flat) | 21 | 23 | 25 | 27 | 29 | 31 |
| Sleeve Length | 20 | 20 1/2 | 21 | 21 1/2 | 22 | 22 1/2 |
| Suggested Imprint Area | 20"W x 26"H | 20"W x 26"H | 20"W x 26"H | 30"W x 31"H | 30"W x 31"H | 30"W x 31"H |
Fabric and construction
Manufacturer highlights
- 10 oz./yd², 60/40 combed ring-spun cotton/polyester
- 3-end fleece
- Three-piece hood with jersey lining
- Jersey back neck tape
- Back locker patch
- Crossover collar
- Drop shoulder
- Side seam pockets with self-lining
- Ribbed cuffs and bottom band
- EasyTear™ label
- Responsible Supplier: this product was made in a facility that is OEKO-TEX certified
Country of origin
Made in Cambodia or Pakistan.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Similar fiber mix
- · Similar weight (10 vs 10 oz)
- · Oversized fit
- · Similar fiber mix
- · Similar weight (9.5 vs 10 oz)
- · Oversized fit
- · Similar fiber mix
- · Similar weight (9.5 vs 10 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (9.5 vs 10 oz)
- · Also Excellent for embroidery
Terms used on this page
- Combed Cotton
- Combed cotton is fiber mechanically combed after carding to remove short fibers and debris, producing a smoother, straighter strand for finer fabric.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Locker Patch (Half-Moon Patch)
- A locker patch, or half-moon patch, is a curved fabric panel sewn at the inside back neck of a garment, a construction cue often paired with small embroidery.
- Drop Shoulder
- Drop shoulder is a construction where the shoulder seam sits below the natural shoulder line and onto the upper arm, giving tees an oversized, boxy silhouette.
- Ribbed Cuffs
- Ribbed cuffs are the stretch rib-knit bands at the sleeve ends of hoodies and sweatshirts, and their recovery determines whether sleeves keep their shape through daily wear.