Shown: Black
Unisex EcoSmart® Full-Zip Hooded Sweatshirt
A blank hooded sweatshirt from the Hanes line, offered in 6 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 50/50 us grown cotton/polyester at 7.8 oz/yd²
- OEKO-TEX certified facility
- Tear-away label for rebranding
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 6— Black
Black
Deep Forest
Deep Red
Deep Royal
Light Steel
Navy
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | Available | |
| M | In Stock | Available | |
| L | In Stock | Available | |
| XL | In Stock | Available | |
| 2XL | In Stock | Available | |
| 3XL | In Stock | Available |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/50 us grown cotton/polyester
- Fabric weight
- 7.8 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 6
- Country of origin
- Dominican Republic, El Salvador, Guatemala, Honduras, Nicaragua
- Sustainability
- OEKO-TEX certified facility; Fair Labor Association; US-grown / BCI cotton
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Across Shoulders | 19 1/2 | 21 1/2 | 23 1/2 | 25 1/2 | 27 1/2 | 29 1/2 |
| Body Length | 26 1/2 | 27 1/2 | 28 1/2 | 29 1/2 | 30 | 30 1/2 |
| Chest Width (Laid Flat) | 20 | 22 | 24 | 26 | 28 | 30 |
| Sleeve Length | 24 3/8 | 24 5/8 | 24 1/4 | 24 | 23 3/4 | 23 1/2 |
Fabric and construction
Manufacturer highlights
- 7.8 oz./yd², 50/50 US grown cotton/polyester
- The polyester content is currently transitioning to CiCLO® polyester
- Patented low-pill high-stitch density PrintPro® XP fleece
- Dyed-to-match drawcord
- Split-pouch pockets
- Coverstitched armholes and waistband
- Ribbed cuffs and waistband
- Transitioning to tear away label
- Responsible Materials: contains US grown BCI cotton
About this blank
Responsible Supplier: this product was made in a facility that is OEKO-TEX and FLA certified.
Country of origin
Made in Dominican Republic, El Salvador, Guatemala, Honduras, or Nicaragua.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 50/50 us grown cotton/polyester
- · Similar weight (7.8 vs 7.8 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (8 vs 7.8 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7.5 vs 7.8 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7.6 vs 7.8 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.
- Ribbed Cuffs
- Ribbed cuffs are the stretch rib-knit bands at the sleeve ends of hoodies and sweatshirts, and their recovery determines whether sleeves keep their shape through daily wear.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.
- Better Cotton (BCI)
- Better Cotton (BCI) is a global training and sourcing program that improves conventional cotton farming's water, pesticide, and labor practices without requiring organic certification.