Shown: Black Ink
Unisex Snow Heather French Terry Raglan Hooded Sweatshirt
A blank hooded sweatshirt from the JERZEES line, offered in 8 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 66/34 polyester/ring-spun cotton french terry at 7.2 oz/yd²
- Tear-away label for rebranding
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 8— Black Ink
Black Ink
Charcoal
Charcoal/ Black Ink
Forest Green
Military Green
Navy
Red
Royal
Available sizes
Availability — Black Ink
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | — | |
| M | In Stock | Available | |
| 3XL | Low Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 66/34 polyester/ring-spun cotton french terry
- Fabric weight
- 7.2 oz/yd²
- Fabric type
- french terry
- Yarn
- ring-spun
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 8
- Country of origin
- Honduras, El Salvador
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured french terry surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat french terry surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | XL | 2XL | 3XL |
|---|---|---|---|---|---|
| Body Length | 27 | 28 | 30 | 31 | 32 |
| Chest Width (Laid Flat) | 20 | 22 | 26 | 28 | 30 |
| Sleeve Length (From Center Back) | 33 1/2 | 34 1/2 | 36 1/2 | 37 1/2 | 38 |
Fabric and construction
Manufacturer highlights
- 7.2 oz./yd², 66/34 polyester/ring-spun cotton French terry
- Pre-shrunk
- V-notch detailing
- Natural back neck tape on all colors
- Gunmetal grommets
- Natural flat woven drawcord
- Double-needle coverstitched hood, raglan sleeves, pocket openings and bottom band
- Pouch pocket
- Spandex in waistband and cuffs
- Tear away label
- Due to the unique yarn process, color variation will occur between body and trim fabric
Country of origin
Made in Honduras or El Salvador.
Shown for the Black Ink colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Similar fiber mix
- · Similar weight (7.6 vs 7.2 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7.6 vs 7.2 oz)
- · Also Excellent for embroidery
- · Similar weight (7.5 vs 7.2 oz)
- · Also Excellent for embroidery
- · Covers S–3XL
- · Similar weight (7 vs 7.2 oz)
- · Also Excellent for embroidery
- · Covers S–3XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Ringspun Cotton
- Ringspun cotton is yarn spun by twisting cotton fibers into a smooth, tightly wound strand, giving fabric a softer hand and finer print surface than open-end cotton.
- French Terry
- French terry is a midweight knit with uncut interior loops instead of a brushed nap, used for lightweight sweatshirts, joggers, and crewnecks.
- Preshrunk
- Preshrunk means a garment was run through a shrink-control process at the mill, so most of the size change a first wash would cause happened before it shipped.
- V-notch (V-insert)
- A V-notch, or V-insert, is a small triangular rib patch set into the collar of a crewneck sweatshirt, a retro detail signaling a heavier, premium vintage-style blank.
- Grommet (Eyelet)
- A grommet, or eyelet, is the metal or sewn ring set into fabric where a drawcord passes through, a small hardware detail that signals a higher-quality hoodie build.