Shown: Ash
Unisex Super Sweats NuBlend® Hooded Sweatshirt
A blank hooded sweatshirt from the JERZEES line, offered in 9 colors in size S. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 50/50 cotton/polyester at 9.5 oz/yd²
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 9— Ash
Ash
Black
Black Heather
Forest Green
J. Navy
Maroon
Oxford
Safety Green
Safety Orange
Available sizes
Availability — Ash
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/50 cotton/polyester
- Fabric weight
- 9.5 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- S
- Colors
- 9
- Country of origin
- Honduras, El Salvador
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes S.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 27 | 28 | 29 | 30 | 31 | 32 |
| Chest Width (Laid Flat) | 20 | 22 | 24 | 26 | 28 | 30 |
| Sleeve Length | 34 1/2 | 35 1/2 | 36 1/2 | 37 1/2 | 38 1/2 | 39 |
Fabric and construction
Manufacturer highlights
- 9.5 oz./yd², 15.9 oz./L yd (CA), 50/50 cotton/polyester
- Oxford is 48/52 cotton/polyester
- Pre-shrunk
- NuBlend® pill-resistant fleece
- High-stitch density for a smooth printing canvas
- 1x1 ribbed collar, cuffs and waistband with spandex
- Double-ply hood with grommets and matching drawcord
- Pouch pocket
- Double-needle stitched waistband, armholes, and collar
- Seamless body
- Set-in sleeves
- Quarter-turned
Country of origin
Made in Honduras or El Salvador.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Same fabric: 50/50 cotton/polyester
- · Similar weight (9 vs 9.5 oz)
- · Also Excellent for embroidery
- · Same fabric: 50/50 cotton/polyester
- · Similar weight (9.3 vs 9.5 oz)
- · Also Excellent for embroidery
- · Same fabric: 50/50 cotton/polyester
- · Also Excellent for embroidery
- · Covers S–3XL
- · Same fabric: 50/50 cotton/polyester
- · Also Excellent for embroidery
- · Covers XS–5XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Preshrunk
- Preshrunk means a garment was run through a shrink-control process at the mill, so most of the size change a first wash would cause happened before it shipped.
- Anti-Pill Fleece
- Anti-pill fleece is fleece treated or engineered to resist forming the small fiber balls that build up on regular fleece after repeated washing and wear.
- Canvas (Duck Cloth)
- Canvas (duck cloth) is a heavy plain-weave cotton or cotton-blend fabric, typically 7-12 oz, used for totes, aprons, and workwear beyond t-shirts.
- Ribbed Collar
- A ribbed collar is a stretchy rib-knit neckband, usually 1x1 rib, whose recovery after stretching depends heavily on how much spandex is blended in.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.