Shown: Black/ Gold Heather
HollowayStyle 222581 · Hoodies
Men's All-American Team Fleece Colorblocked Hooded Sweatshirt
A blank hooded sweatshirt from the Holloway line, offered in 11 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 55/41/4 polyester/cotton/rayon at 7.6 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 11— Black/ Gold Heather
Black/ Gold Heather
Black/ Orange Heather
Black/ Scarlet Heather
Black/ White
Carbon Heather/ Black
Dark Green Heather/ White
Maroon Heather/ White
Navy Heather/ White
Royal Heather/ White
Scarlet Heather/ White
White/ Carbon Heather
Available sizes
Availability — Black/ Gold Heather
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | — | |
| M | Limited | — | |
| L | Limited | — | |
| XL | In Stock | — | |
| 2XL | Limited | — | |
| 3XL | Limited | — |
Last inventory sync: July 14, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 55/41/4 polyester/cotton/rayon
- Fabric weight
- 7.6 oz/yd²
- Fabric type
- jersey
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 11
- Country of origin
- Egypt
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 28 | 28 3/4 | 29 1/2 | 30 1/4 | 31 | 31 3/4 |
| Chest Circumference | 39 | 43 | 47 | 51 | 55 | 59 |
| Sleeve Length | 34 | 35 | 36 | 37 | 38 | 39 |
Fabric and construction
Manufacturer highlights
- 7.6 oz./yd², 55/41/4 polyester/cotton/rayon
- Jersey lined hood with metal tipped drawcord
- Pouch pocket
- Side vents
- Set-in sleeves
- Spandex blend ribbed-knit cuffs
- Dropped tail
- Faux leather loop logo on right bottom hem
- Woven label
Country of origin
Made in Egypt.
Shown for the Black/ Gold Heather colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 55/41/4 polyester/cotton/rayon
- · Similar weight (7.6 vs 7.6 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7.6 vs 7.6 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7.6 vs 7.6 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (8 vs 7.6 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Rayon (Viscose)
- Rayon (viscose) is a semi-synthetic fiber made by dissolving wood pulp cellulose and re-spinning it into filament, prized for a silky drape neither cotton nor polyester can match.
- Double-lined hood
- A double-lined hood has a second layer of fabric sewn inside the outer shell, adding warmth, structure, and often a contrast-color interior.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.