Shown: True Red
Men's Dri-Power® Long Sleeve Polo
A blank polo from the JERZEES line, offered in 3 colors and sizes S–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 50/50 cotton/polyester jersey at 5.4 oz/yd²
- US-grown / BCI cotton
- Tear-away label for rebranding
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— True Red
True Red
White
Forest Green
Available sizes
Availability — True Red
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Low Stock | — | |
| 2XL | Limited | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/50 cotton/polyester jersey
- Fabric weight
- 5.4 oz/yd²
- Fabric type
- jersey
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–2XL
- Colors
- 3
- Country of origin
- Honduras, El Salvador
- Sustainability
- US-grown / BCI cotton
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–2XL.
Garment measurements in inches, laid flat.
| Measurement | S | 2XL |
|---|---|---|
| Body Length | 29 | 33 |
| Chest Width (Laid Flat) | 19 | 27 |
Fabric and construction
Manufacturer highlights
- 5.4 oz./yd², 50/50 cotton/polyester jersey
- Oxford is 47/53 cotton/polyester
- Made with sustainably-sourced USA-grown cotton
- Pre-shrunk
- Moisture management properties
- Welt knit collar resists curling
- Two-button placket with bottom box stitched reinforcement
- Pearlized buttons with durable cross-stitching
- 1x1 ribbed sleeve cuffs
- Two-needle hemmed bottom
- Tear away label
Country of origin
Made in Honduras or El Salvador.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 50/50 cotton/polyester jersey
- · Similar weight (5.2 vs 5.4 oz)
- · Covers S–5XL
- · Same fabric: 50/50 cotton/polyester jersey
- · Similar weight (5.4 vs 5.4 oz)
- · Same fabric: 50/50 cotton/polyester jersey
- · Similar weight (5.4 vs 5.4 oz)
- · Same fabric: 50/50 cotton/polyester jersey
- · Similar weight (5.4 vs 5.4 oz)
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Preshrunk
- Preshrunk means a garment was run through a shrink-control process at the mill, so most of the size change a first wash would cause happened before it shipped.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Ribbed Cuffs
- Ribbed cuffs are the stretch rib-knit bands at the sleeve ends of hoodies and sweatshirts, and their recovery determines whether sleeves keep their shape through daily wear.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.