Shown: Ash
Men's Dri-Power® Polo
A blank polo from the JERZEES line, offered in 14 colors and sizes 3XL–5XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 50/50 cotton/polyester jersey at 5.4 oz/yd²
- US-grown / BCI cotton
- Tear-away label for rebranding
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 14— Ash
Ash
California Blue
Charcoal Grey
Deep Purple
Gold
Kelly
Kiwi
Light Blue
Maroon
Oxford
Royal
Safety Green
True Red
White
Available sizes
Availability — Ash
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| 3XL | Low Stock | — | |
| 4XL | Low Stock | — | |
| 5XL | Inventory Unavailable | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/50 cotton/polyester jersey
- Fabric weight
- 5.4 oz/yd²
- Fabric type
- jersey
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- 3XL–5XL
- Colors
- 14
- Country of origin
- Honduras, El Salvador
- Sustainability
- US-grown / BCI cotton
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes 3XL–5XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL | 4XL | 5XL |
|---|---|---|---|---|---|---|---|---|
| Body Length | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 |
| Chest Width (Laid Flat) | 19 | 21 | 23 | 25 | 27 | 29 | 30 | 31 |
Fabric and construction
Manufacturer highlights
- 5.4 oz./yd², 50/50 cotton/polyester jersey
- Oxford is 47/53 cotton/polyester
- Made with sustainably-sourced USA-grown cotton
- Pre-shrunk
- Moisture-management properties
- Welt knit collar resists curling
- Two-button placket with bottom box stitched reinforcement
- Pearlized buttons with durable cross-stitching
- 1x1 ribbed sleeve bands
- Two-needle hemmed bottom
- Tear away label
Country of origin
Made in Honduras or El Salvador.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 50/50 cotton/polyester jersey
- · Similar weight (5.2 vs 5.4 oz)
- · Same fabric: 50/50 cotton/polyester jersey
- · Similar weight (5.4 vs 5.4 oz)
- · Same fabric: 50/50 cotton/polyester jersey
- · Similar weight (5.4 vs 5.4 oz)
- · Same fabric: 50/50 cotton/polyester jersey
- · Similar weight (5.4 vs 5.4 oz)
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Preshrunk
- Preshrunk means a garment was run through a shrink-control process at the mill, so most of the size change a first wash would cause happened before it shipped.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.