Shown: Royal

Men's Dri-Power® Performance Polo

A blank polo from the JERZEES line, offered in Royal in size XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.

Excellent for sublimation
100% polyester at 4 oz/yd²

⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
⚠ DTF transfer and Embroidery: conditional — test first.

Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.

Colors 1— Royal

Available sizes

Availability — Royal

Availability by size for the Royal colorway, as of the last catalog sync
Size	Status	Local pickup (Chicagoland)	Actions
XL	Limited	—

Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.

Key specifications

Fabric composition: 100% polyester
Fabric weight: 4 oz/yd²
Fabric type: mesh
Yarn: Not stated
Construction: Side-seamed
Label: Tagless
Cut for: Men's
Fit: Not stated
Sizes: XL
Colors: 1
Country of origin: Madagascar
Sustainability: Not stated

Decoration compatibility

VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.

Decoration method compatibility for this garment
Method	Rating	Notes
Screen printing	Good	Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate. Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer	Conditional	Open or slick mesh surface — adhesion varies; run a wash test first. High press heat can affect polyester — test temperature and dwell time before a full run. Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing	Not Recommended	Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead. Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test. Non-flat mesh surface reduces DTG detail.
Embroidery	Conditional	Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well. Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer	Good	Standard HTV and transfers apply well at the correct temperature for this fiber mix. Use low-temperature transfer material to avoid scorch or dye migration on polyester. Verify transfer adhesion over moisture-management finishes.
Sublimation	Excellent	High-polyester fabric accepts sublimation dye fully. Sublimation shows only on white or very light garment colors.

Screen printing

Good

Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.

Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.

DTF transfer

Conditional

Open or slick mesh surface — adhesion varies; run a wash test first.

High press heat can affect polyester — test temperature and dwell time before a full run.
Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.

DTG printing

Not Recommended

Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.

Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Non-flat mesh surface reduces DTG detail.

Embroidery

Conditional

Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.

Lightweight or performance knit — use a stabilizer/backing to prevent puckering.

Heat transfer

Good

Standard HTV and transfers apply well at the correct temperature for this fiber mix.

Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Verify transfer adhesion over moisture-management finishes.

Sublimation

Excellent

High-polyester fabric accepts sublimation dye fully.

Sublimation shows only on white or very light garment colors.

Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.

Fit and sizing

Fit category not stated, cut for men's wear · sizes XL.

Garment measurements in inches, laid flat.

Measurement	XL
Body Length	32
Chest Width (Laid Flat)	25
Sleeve Length (From Center Back)	21

Fabric and construction

Manufacturer highlights

4 oz./yd², 100% polyester closed hole micro mesh
Moisture-wicking performance
UPF 40+ protection
Odor-control properties
Side-seams
Welt collar
Dyed-to-match three-button placket with bottom box-stitched reinforcement
Clean-finished side vents
Double-needle stitching on armholes, sleeves, and bottom hem
Tagless label
This style is an updated comparable style to 441M

Country of origin

Made in Madagascar.

Recommended applications

Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
Fitness →
Moisture-management fabric for active wear.

Similar alternatives

AllPro 4HM00

Men's Pro-Lock Performance Mélange Polo

8 colors · XS–4XL

· Same fabric: 100% polyester
· Similar weight (4.5 vs 4 oz)
· Also Excellent for sublimation

AllPro 41800

Men's Pro-Lock Performance Polo

27 colors · XS–5XL

· Same fabric: 100% polyester
· Similar weight (4 vs 4 oz)
· Also Excellent for sublimation

C2 Sport 5903

Men's Sport Polo

8 colors · XS–4XL

· Same fabric: 100% polyester
· Similar weight (3.5 vs 4 oz)
· Also Excellent for sublimation

C2 Sport 5900

Men's Utility Polo

16 colors · XS–4XL

· Same fabric: 100% polyester
· Similar weight (3.8 vs 4 oz)
· Also Excellent for sublimation

View all 380 polos →

Terms used on this page

Polyester: Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
Mesh: Mesh is an open-construction knit fabric with visible holes for airflow, used in athletic jerseys, cap back panels, and moisture-wicking gear.
Placket: A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
Side Vents (Split Hem): Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.
Double-Needle Stitching: Double-needle stitching sews two parallel rows of lockstitch, usually 1/4 inch apart, along hems and sleeve openings so the seam allowance stays flat and resists unraveling.
Heat Transfer Label: A heat transfer label is a printed neck or care label pressed directly onto fabric with a heat press instead of sewn in as woven or satin tape.