Shown: Charcoal Fleck
J. AmericaStyle 8614 · Sweatshirts
Men's Cosmic Fleece Quarter-Zip Sweatshirt
A blank crewneck sweatshirt from the J. America line, offered in 5 colors in size S. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% spun polyester at 7 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 5— Charcoal Fleck
Charcoal Fleck
Navy Fleck
Onyx Fleck
Red Fleck
Royal Fleck
Available sizes
Availability — Charcoal Fleck
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% spun polyester
- Fabric weight
- 7 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Side-seamed
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S
- Colors
- 5
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S.
Garment measurements in inches, laid flat.
| Measurement | S | M |
|---|---|---|
| Body Length | 26 1/2 | 27 1/2 |
| Chest Width (Laid Flat) | 20 | 21 1/2 |
| Sleeve Length | 34 | 35 |
Fabric and construction
Manufacturer highlights
- 7 oz./yd², 100% spun polyester fleece
- Self-fabric collar, cuffs and waistband
- Side-seam pockets
- Underarm and side gusset panels
Country of origin
Made in China.
Shown for the Charcoal Fleck colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Similar weight (7 vs 7 oz)
- · Also Excellent for embroidery
- · Covers XS–3XL
- · Similar weight (7 vs 7 oz)
- · Also Excellent for embroidery
- · Covers XXS–3XL
- · Similar weight (7.5 vs 7 oz)
- · Also Excellent for embroidery
- · Covers S–2XL
- · Similar weight (7.1 vs 7 oz)
- · Also Excellent for embroidery
- · Covers S–3XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Self-fabric collar
- A self-fabric collar is a polo collar cut from the same piqué or jersey yardage as the shirt body instead of a separately knitted piece.
- Gusset
- A gusset is a diamond-shaped panel of extra fabric set into an underarm or crotch seam to add stretch room and stop that seam from ripping under stress.