Shown: Pepper/ Black
J. AmericaStyle 8704 · Sweatshirts
Men's Peppered Fleece Shawl Collar Sweatshirt
A blank crewneck sweatshirt from the J. America line, offered in Pepper/ Black and sizes S–M. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 55/45 cotton/polyester heathered fleece at 9.25 oz/yd²
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Pepper/ Black
Pepper/ Black
Available sizes
Availability — Pepper/ Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | — | |
| M | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 55/45 cotton/polyester heathered fleece
- Fabric weight
- 9.25 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–M
- Colors
- 1
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–M.
Garment measurements in inches, laid flat.
| Measurement | S | M |
|---|---|---|
| Body Length | 26 | 27 1/2 |
| Chest Width (Laid Flat) | 20 | 21 1/2 |
| Sleeve Length (From Center Back) | 33 | 34 1/2 |
Fabric and construction
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Similar fiber mix
- · Similar weight (9 vs 9.25 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (9.5 vs 9.25 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (9.5 vs 9.25 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (9.29 vs 9.25 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Heather Fabric
- Heather fabric is knit or woven from a blend of dyed and undyed fiber, creating a mottled two-tone look that usually signals polyester content.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- 1x1 Rib
- 1x1 rib is a knit alternating single knit and purl columns one stitch wide, giving collars and cuffs the stretch and recovery to snap back after wear.
- Yarn-dyed
- Yarn-dyed fabric is knit or woven from yarn colored before construction, so stripes, heathers, and multicolor patterns run through the fabric rather than just its surface.