Shown: Cement
J. AmericaStyle 8920 · Sweatshirts
Men's Vintage Zen Fleece Crewneck Sweatshirt
A blank crewneck sweatshirt from the J. America line, offered in 3 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 55/45 cotton/polyester burnout fleece at 7.1 oz/yd²
- Tear-away label for rebranding
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— Cement
Cement
Dark Smoke
Twisted Black
Available sizes
Availability — Cement
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Low Stock | — | |
| M | Low Stock | — | |
| L | Limited | — | |
| 2XL | Low Stock | — | |
| 3XL | Low Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 55/45 cotton/polyester burnout fleece
- Fabric weight
- 7.1 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 3
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 27 | 28 | 29 | 30 | 31 | 32 |
| Chest Width (Laid Flat) | 19.5 | 21 | 22.5 | 24 | 25.5 | 27 |
| Sleeve Length (From Center Back) | 34 | 35 | 36 | 37 | 38 | 39 |
Fabric and construction
Manufacturer highlights
- 7.1 oz./yd², 55/45 cotton/polyester burnout fleece
- 2x1 ribbed collar, V-notch, cuffs and waistband
- Tear away label
About this blank
J. America Zen Fabric is a specialty product that undergoes a variety of processes to create its unique and textured look. As a result, the finished garments will shed a portion of their darker fibers, becoming noticeably lighter in shade after the initial laundry cycles. For best results, please wash and dry separately, following label instructions, for the initial launderings. Significant lint build up in the dryer is normal in the initial laundry cycles and can be avoided by hanging to dry.
Country of origin
Made in China.
Shown for the Cement colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 55/45 cotton/polyester burnout fleece
- · Similar weight (7 vs 7.1 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7.5 vs 7.1 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7 vs 7.1 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7 vs 7.1 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Burnout Fabric
- Burnout fabric is a poly-cotton blend chemically treated to dissolve the cotton in a pattern, leaving a sheer, worn-in look prized for vintage tees.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Ribbed Collar
- A ribbed collar is a stretchy rib-knit neckband, usually 1x1 rib, whose recovery after stretching depends heavily on how much spandex is blended in.
- V-notch (V-insert)
- A V-notch, or V-insert, is a small triangular rib patch set into the collar of a crewneck sweatshirt, a retro detail signaling a heavier, premium vintage-style blank.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.