Shown: Electric Blue/ Neon Green
J. AmericaStyle 8610 · Hoodies
Youth Cosmic Fleece Hooded Sweatshirt
A blank hooded sweatshirt from the J. America line, offered in Electric Blue/ Neon Green in size L. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% spun polyester at 7 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Only 0 of 1 colors in stock at last sync.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Electric Blue/ Neon Green
Electric Blue/ Neon Greenout of stock
Available sizes
Availability — Electric Blue/ Neon Green
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| L | Out of Stock | — |
Last inventory sync: July 23, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% spun polyester
- Fabric weight
- 7 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Youth
- Fit
- Not stated
- Sizes
- L
- Colors
- 1
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for youth wear · sizes L.
Garment measurements in inches, laid flat.
| Measurement | L |
|---|---|
| Body Length | 25 |
| Chest Width (Laid Flat) | 20 |
| Sleeve Length | 29 |
Fabric and construction
Manufacturer highlights
- 7 oz./yd², 100% spun polyester fleck fleece
- Contrast-color hood lining
- No drawcord
- Pouch pocket
- Side gusset panels
Country of origin
Made in China.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Similar weight (7 vs 7 oz)
- · Also Excellent for embroidery
- · Covers S–XL
- · Similar weight (6.8 vs 7 oz)
- · Also Excellent for embroidery
- · Covers S–XL
- · Similar weight (7 vs 7 oz)
- · Also Excellent for embroidery
- · Covers XS–XL
- · Similar weight (7.1 vs 7 oz)
- · Also Excellent for embroidery
- · Covers S–L
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.
- Gusset
- A gusset is a diamond-shaped panel of extra fabric set into an underarm or crotch seam to add stretch room and stop that seam from ripping under stress.