Shown: Charcoal Heather/ Oxford
BoxercraftStyle BY5404 · Hoodies
Youth Colorblocked Hooded Sweatshirt
A blank hooded sweatshirt from the Boxercraft line, offered in 4 colors and sizes S–L. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 50/50 cotton/polyester fleece at 7.1 oz/yd²
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 4— Charcoal Heather/ Oxford
Charcoal Heather/ Oxford
Collegiate Blue
Navy/ Oxford Heather
Oxford Heather/ White
Available sizes
Availability — Charcoal Heather/ Oxford
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/50 cotton/polyester fleece
- Fabric weight
- 7.1 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Youth
- Fit
- Not stated
- Sizes
- S–L
- Colors
- 4
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for youth wear · sizes S–L.
Garment measurements in inches, laid flat.
| Measurement | S | M | L |
|---|---|---|---|
| Body Length | 19 1/2 | 21 1/2 | 23 1/2 |
| Chest Width (Laid Flat) | 17 1/2 | 18 1/2 | 19 1/2 |
| Sleeve Length | 19 | 20 | 21 |
Fabric and construction
Manufacturer highlights
- 7.1 oz./yd²., 50/50 cotton/polyester fleece
- 2-ply self-fabric hood
- Rib cuffs and bottom band
- Woven label
Country of origin
Made in China.
Shown for the Charcoal Heather/ Oxford colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Similar fiber mix
- · Similar weight (7.6 vs 7.1 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7.5 vs 7.1 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7.5 vs 7.1 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Also Excellent for embroidery
- · Covers XS–XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Ribbed Cuffs
- Ribbed cuffs are the stretch rib-knit bands at the sleeve ends of hoodies and sweatshirts, and their recovery determines whether sleeves keep their shape through daily wear.
- Woven Label
- A woven label is a fabric tag with a logo or brand name woven into the threads on a loom, then sewn into a garment's neck or hem.