Shown: Black Triblend
J. AmericaStyle 8880 · Hoodies
Youth Triblend Fleece Hooded Sweatshirt
A blank hooded sweatshirt from the J. America line, offered in Black Triblend and sizes M–XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 55/39/6 cotton/polyester/rayon triblend fleece at 7.5 oz/yd²
- Tear-away label for rebranding
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Black Triblend
Black Triblend
Available sizes
Availability — Black Triblend
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| M | Limited | — | |
| L | Limited | — | |
| XL | Low Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 55/39/6 cotton/polyester/rayon triblend fleece
- Fabric weight
- 7.5 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Youth
- Fit
- Not stated
- Sizes
- M–XL
- Colors
- 1
- Country of origin
- Pakistan
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for youth wear · sizes M–XL.
Garment measurements in inches, laid flat.
| Measurement | M | L | XL |
|---|---|---|---|
| Body Length | 23 | 24 1/4 | 25 1/2 |
| Chest Width (Laid Flat) | 17 | 18 | 19 |
| Sleeve Length (From Center Back) | 26 | 27 | 28 |
Fabric and construction
Manufacturer highlights
- 7.5 oz./yd², 55/39/6 cotton/polyester/rayon triblend fleece
- Coverstitched throughout
- Pouch pocket
- Ribbed cuffs and waistband
- Tear away label
Country of origin
Made in Pakistan.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Similar fiber mix
- · Similar weight (8 vs 7.5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (8 vs 7.5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (8 vs 7.5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7.8 vs 7.5 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Rayon (Viscose)
- Rayon (viscose) is a semi-synthetic fiber made by dissolving wood pulp cellulose and re-spinning it into filament, prized for a silky drape neither cotton nor polyester can match.
- Tri-Blend
- Tri-blend fabric mixes cotton, polyester, and rayon in one yarn, producing an especially soft, drapey tee with a naturally heathered, faded print look.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Ribbed Cuffs
- Ribbed cuffs are the stretch rib-knit bands at the sleeve ends of hoodies and sweatshirts, and their recovery determines whether sleeves keep their shape through daily wear.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.