Shown: Black
HollowayStyle 222590 · Hoodies
Unisex CoolCore® Sleeveless Hooded T-Shirt
A blank hooded sweatshirt from the Holloway line, offered in 7 colors and sizes XS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 88/12 polyester/elastane at 4.4 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ DTF transfer and Embroidery and Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 7— Black
Black
Iron
Maroon
Navy
Royal
Scarlet
White
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Low Stock | — | |
| M | In Stock | — | |
| 3XL | Low Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 88/12 polyester/elastane
- Fabric weight
- 4.4 oz/yd²
- Fabric type
- mesh
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tagless
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- XS–3XL
- Colors
- 7
- Country of origin
- Mexico
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Conditional
Open or slick mesh surface — adhesion varies; run a wash test first.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat mesh surface reduces DTG detail.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes XS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| Body Length | 27 1/4 | 28 | 28 3/4 | 29 1/2 | 30 1/4 | 31 | 31 3/4 |
| Chest Circumference | 33 1/2 | 37 | 40 1/2 | 44 | 48 | 52 | 56 |
Fabric and construction
Manufacturer highlights
- 4.4 oz./yd², 88/12 polyester/elastane
- 92/8 polyester/elastane knit mesh inserts
- Coolcore® fabric with color secure® technology that helps prevent dye migration
- Moisture-wicking performance
- UPF 50+ protection
- Four-way stretch fabric for increased mobility
- Overlapping hood
- Side insert pocket
- Tagless label
Country of origin
Made in Mexico.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Similar weight (4.1 vs 4.4 oz)
- · Covers XS–4XL
- · Similar weight (4.5 vs 4.4 oz)
- · Covers XS–3XL
- · Similar weight (4.5 vs 4.4 oz)
- · Covers XS–3XL
- · Similar weight (4.1 vs 4.4 oz)
- · Covers XS–4XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Mesh
- Mesh is an open-construction knit fabric with visible holes for airflow, used in athletic jerseys, cap back panels, and moisture-wicking gear.
- Dye Migration
- Dye migration is disperse dye from a polyester garment sublimating into wet ink during curing, turning white ink pink on a red shirt.
- UPF (Ultraviolet Protection Factor)
- UPF rates how much UV radiation a fabric blocks, from 15 (good) to 50+ (excellent, blocking over 97.5% of rays), tested under AATCC 183.
- Heat Transfer Label
- A heat transfer label is a printed neck or care label pressed directly onto fabric with a heat press instead of sewn in as woven or satin tape.