Shown: Athletic Heather/ Vanilla
HollowayStyle 223526 · Hoodies
Unisex Heritage Prep Hooded Sweatshirt
A blank hooded sweatshirt from the Holloway line, offered in 3 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 51/45/4 polyester/cotton/spandex at 9 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— Athletic Heather/ Vanilla
Athletic Heather/ Vanilla
Black/ Vanilla
Navy/ Vanilla
Available sizes
Availability — Athletic Heather/ Vanilla
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | In Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 51/45/4 polyester/cotton/spandex
- Fabric weight
- 9 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 3
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 27 1/2 | 28 1/4 | 29 | 29 3/4 | 30 1/2 | 31 1/4 |
| Chest Width (Laid Flat) | 20 | 22 | 24 | 26 | 28 | 30 |
| Sleeve Length (From Center Back) | 34 | 35 | 36 | 37 | 38 | 39 |
Fabric and construction
Manufacturer highlights
- 9 oz /yd², 51/45/4 polyester/cotton/spandex
- Self-fabric lined hood with silicone dipped tip drawcord
- Set-in sleeves
- Front pouch pocket
- Hanger loop label
Country of origin
Made in China.
Shown for the Black/ Vanilla colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Similar fiber mix
- · Similar weight (9 vs 9 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (9 vs 9 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (9 vs 9 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (9 vs 9 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Double-lined hood
- A double-lined hood has a second layer of fabric sewn inside the outer shell, adding warmth, structure, and often a contrast-color interior.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.
- Kangaroo Pocket
- A kangaroo pocket is the single front pouch stitched onto a pullover hoodie, and its top edge sets the lower limit for any front print or design.