Shown: Tri Brown
US BlanksStyle US2229 · T-Shirts
Unisex Tri-Blend T-Shirt
A blank t-shirt from the US Blanks line, offered in 5 colors and sizes XS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 50/38/12 poly/cotton/rayon tri-blend jersey at 4.9 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 5— Tri Brown
Tri Brown
Tri Charcoal
Tri Navy
Tri Oatmeal
Ash
Available sizes
Availability — Tri Brown
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Limited | — | |
| S | Low Stock | — | |
| M | Inventory Unavailable | — | |
| XL | Inventory Unavailable | — | |
| 2XL | Low Stock | — | |
| 3XL | Limited | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/38/12 poly/cotton/rayon tri-blend jersey
- Fabric weight
- 4.9 oz/yd²
- Fabric type
- jersey
- Yarn
- 20 singles
- Construction
- Side-seamed
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- XS–3XL
- Colors
- 5
- Country of origin
- United States
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes XS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 20 | 20 3/4 | 30 1/2 | 31 1/2 | 32 1/2 | |
| Chest Width (Laid Flat) | 20 1/2 | 21 1/2 | 24 1/2 | 26 | 27 1/2 |
Fabric and construction
Manufacturer highlights
- 4.9 oz./yd², 50/38/12 poly/cotton/rayon tri-blend jersey, 20 singles
- Athletic retail fit
- Shoulder-to-shoulder taping
- Double-needle stitching on sleeves and bottom hem
- High-low bottom with slit sides
- Sideseamed
Country of origin
Made in United States.
Shown for the Ash colorway; origin can vary by color and production run.
Recommended applications
- Events →
Event-crew staple with quick decoration turnaround.
Similar alternatives
- · Similar fiber mix
- · Similar weight (5.3 vs 4.9 oz)
- · Covers S–3XL
- · Similar fiber mix
- · Similar weight (5.3 vs 4.9 oz)
- · Covers S–3XL
- · Similar fiber mix
- · Similar weight (4.5 vs 4.9 oz)
- · Covers S–3XL
- · Similar fiber mix
- · Similar weight (4.5 vs 4.9 oz)
Terms used on this page
- Poly-Cotton Blend (50/50)
- A poly-cotton blend combines roughly equal parts polyester and cotton fiber, cutting shrinkage and cost versus 100% cotton while keeping a soft, breathable hand.
- Rayon (Viscose)
- Rayon (viscose) is a semi-synthetic fiber made by dissolving wood pulp cellulose and re-spinning it into filament, prized for a silky drape neither cotton nor polyester can match.
- Tri-Blend
- Tri-blend fabric mixes cotton, polyester, and rayon in one yarn, producing an especially soft, drapey tee with a naturally heathered, faded print look.
- Singles (Yarn Count)
- Singles is the yarn-count system where a higher number, like 30/1, means finer, thinner yarn, and a lower number, like 18/1, means thicker, coarser yarn.
- Retail Fit
- Retail fit is a softer, slimmer, side-seamed T-shirt style built to drape and feel like a mall-brand shirt rather than a boxy promotional blank.
- Taped Neck (Shoulder-to-Shoulder Taping)
- A taped neck is a strip of tape sewn over a garment's shoulder-to-shoulder seam to stop it from stretching out and smooth the seam against skin.