Shown: Black/ White
Under ArmourStyle 1383260 · More Styles
Men's Command 2.0 Quarter-Zip Pullover
A blank garment from the Under Armour line, offered in 3 colors and sizes S–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% polyester at 7.41 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— Black/ White
Black/ White
Midnight Navy/ White
Mod Grey/ White
Available sizes
Availability — Black/ White
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Low Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | In Stock | — | |
| 4XL | Low Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 7.41 oz/yd²
- Fabric type
- french terry
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tagless
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–4XL
- Colors
- 3
- Country of origin
- Jordan
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured french terry surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat french terry surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–4XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|
| Body Length | 28 | 28 1/2 | 29 | 30 | 31 | 33 | |
| Chest Width (Laid Flat) | 21 1/2 | 23 | 24 1/2 | 26 | 27 1/2 | ||
| Sleeve Length | 34 1/4 | 35 1/8 | 36 | 36 7/8 | 37 3/4 |
Fabric and construction
Manufacturer highlights
- 7.41 oz/yd²., (US), 12.4 oz./L yd (CA), 100% Polyester
- Fuller cut for complete comfort
- Material wicks sweat & dries really fast
- French Terry fabric you can actually work out in - same comfort, but stretchier, lighter and faster
- Quarter-zip front makes for easy layering
- Front pouch pocket
- Binding at cuffs and bottom hem
- Contrast heat-seal logo on right chest
- Pad-printed label
About this blank
Under Armour products purchased must be resold only with embellishment. Sale of Under Armour on the internet or elsewhere without embellishment is strictly prohibited. Failure to comply with these policies will result in loss of privileges for selling this brand.
Country of origin
Made in Jordan.
Shown for the Black/ White colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (7.8 vs 7.41 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (7.37 vs 7.41 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (7 vs 7.41 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (7.4 vs 7.41 oz)
- · Also Excellent for embroidery
Terms used on this page
- Ounces per square yard (oz/yd²)
- Ounces per square yard (oz/yd²) is the US fabric-weight spec printed on nearly every blank’s product page, measuring how many ounces one square yard weighs.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- French Terry
- French terry is a midweight knit with uncut interior loops instead of a brushed nap, used for lightweight sweatshirts, joggers, and crewnecks.
- Quarter-zip
- A quarter-zip is a pullover shirt or jacket with a short front zipper, usually 6 to 8 inches, that opens partway down the chest.
- Kangaroo Pocket
- A kangaroo pocket is the single front pouch stitched onto a pullover hoodie, and its top edge sets the lower limit for any front print or design.