Shown: Black Heather
BoxercraftStyle BM5207 · More Styles
Men's Alpine Quarter-Zip Pullover
A blank garment from the Boxercraft line, offered in 3 colors and sizes XXS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% polyester at 7.8 oz/yd²
- 8-size run (XXS–3XL)
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— Black Heather
Black Heather
Navy Heather
Oxford Heather
Available sizes
Availability — Black Heather
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XXS | Low Stock | — | |
| XS | Limited | — | |
| S | Limited | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 7.8 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- XXS–3XL
- Colors
- 3
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes XXS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XXS | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|---|
| Body Length | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 |
| Chest Width (Laid Flat) | 20 | 22 | 23 | 24 | 25 | 26 | 27 | 28 |
| Sleeve Length | 25 | 25 1/2 | 26 | 26 1/2 | 27 | 27 1/2 | 28 | 29 |
Fabric and construction
Manufacturer highlights
- 7.8 oz./yd², 100% polyester, double sweater fleece
- Self-fabric collar
- Forward shoulder seams
- Concealed zipper placket
- Self-fabric cuffs and bottom band
- Contrast cover seaming
- Woven label
About this blank
Boxercraft products purchased from us must be sold with embellishment, Re-selling from an unauthorized retail store, website, or any third-party site (i.e., Amazon, Craigslist, eBay, Walmart, etc.) is strictly prohibited and must adhere to Boxercraft’s M.A.P (Minimum Advertised Pricing) policy. Failure to comply will result in loss of privilege to sell the Boxercraft brand.
Country of origin
Made in China.
Shown for the Black Heather colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (8 vs 7.8 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (8 vs 7.8 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (7.37 vs 7.8 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (7.41 vs 7.8 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Self-fabric collar
- A self-fabric collar is a polo collar cut from the same piqué or jersey yardage as the shirt body instead of a separately knitted piece.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Woven Label
- A woven label is a fabric tag with a logo or brand name woven into the threads on a loom, then sewn into a garment's neck or hem.