Shown: Black/ White
Under ArmourStyle 1379757 · Hoodies
Men's Rival Fleece Hooded Sweatshirt
A blank hooded sweatshirt from the Under Armour line, offered in 7 colors and sizes XL–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 80/20 cotton/polyester at 8.11 oz/yd²
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 7— Black/ White
Black/ White
CS Grey Light Heather/ White
Maroon/ White
Midnight Navy/ White
Red/ White
Royal/ White
White/ Black
Available sizes
Availability — Black/ White
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XL | Inventory Unavailable | — | |
| 2XL | Inventory Unavailable | — | |
| 3XL | Inventory Unavailable | — | |
| 4XL | Inventory Unavailable | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 80/20 cotton/polyester
- Fabric weight
- 8.11 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- XL–4XL
- Colors
- 7
- Country of origin
- Philippines
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes XL–4XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|
| Body Length | 28 1/2 | 29 | 29 1/2 | 30 1/2 | 31 1/2 | 32 1/2 | 33 1/2 |
| Chest Width (Laid Flat) | 22 | 23 1/2 | 25 | 26 1/2 | 28 | 29 1/2 | 31 |
| Sleeve Length | 34 3/4 | 35 5/8 | 36 1/2 | 37 3/8 | 38 1/4 | 39 1/8 | 40 |
Fabric and construction
Manufacturer highlights
- 8.11 oz./yd²., (US), 13.5 oz./L yd (CA), 80/20 cotton/polyester
- Fuller cut for complete comfort
- Ultra-soft cotton-blend fleece with brushed inside for extra warmth
- Front pouch pocket
- Ribbed cuffs & bottom hem
About this blank
Under Armour products purchased must be resold only with embellishment. Sale of Under Armour on the internet or elsewhere without embellishment is strictly prohibited. Failure to comply with these policies will result in loss of privileges for selling this brand.
Country of origin
Made in Philippines.
Shown for the White/ Black colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 80/20 cotton/polyester
- · Similar weight (8.26 vs 8.11 oz)
- · Also Excellent for embroidery
- · Same fabric: 80/20 cotton/polyester
- · Similar weight (8 vs 8.11 oz)
- · Also Excellent for embroidery
- · Same fabric: 80/20 cotton/polyester
- · Similar weight (8.26 vs 8.11 oz)
- · Also Excellent for embroidery
- · Same fabric: 80/20 cotton/polyester
- · Also Excellent for embroidery
- · Covers S–4XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Kangaroo Pocket
- A kangaroo pocket is the single front pouch stitched onto a pullover hoodie, and its top edge sets the lower limit for any front print or design.
- Ribbed Cuffs
- Ribbed cuffs are the stretch rib-knit bands at the sleeve ends of hoodies and sweatshirts, and their recovery determines whether sleeves keep their shape through daily wear.