Shown: Black/ White
Under ArmourStyle 1300123 · Hoodies
Men's Hustle Hooded Sweatshirt
A blank hooded sweatshirt from the Under Armour line, offered in 3 colors in size S. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for screen printing and embroidery
- 80/20 cotton/polyester at 8 oz/yd²
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— Black/ White
Black/ White
Red/ White
True Grey Heather/ Black
Available sizes
Availability — Black/ White
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Low Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 80/20 cotton/polyester
- Fabric weight
- 8 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S
- Colors
- 3
- Country of origin
- Malaysia
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Excellent
Cotton-dominant knit takes plastisol and water-based ink cleanly with standard cure settings.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S.
Garment measurements in inches, laid flat.
| Measurement | S | M | XL |
|---|---|---|---|
| Body Length | 27 1/2 | 28 1/2 | 30 1/2 |
| Chest Width (Laid Flat) | 20 1/2 | 21 1/2 | 23 1/2 |
Fabric and construction
Manufacturer highlights
- 8 oz./yd²., (US), 13.3 oz./L yd (CA), 80/20 cotton/polyester
- Carbon Heather/Grey: Carbon body, Grey drawcords, White logo
- Four-way stitched construction
- Moisture-management properties
- Ultra-soft, mid-weight performance cotton with brushed interior
- Lined hood with adjustable drawcords
- Classic front pouch pocket
- Ribbed cuffs and hem
- Under Armour logo on upper center chest
About this blank
Under Armour products purchased must be resold only with embellishment. Sale of Under Armour on the internet or elsewhere without embellishment is strictly prohibited. Failure to comply with these policies will result in loss of privileges for selling this brand.
Country of origin
Made in Malaysia.
Shown for the Black/ White colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 80/20 cotton/polyester
- · Similar weight (8.3 vs 8 oz)
- · Also Excellent for screen printing
- · Same fabric: 80/20 cotton/polyester
- · Similar weight (8.26 vs 8 oz)
- · Also Excellent for embroidery
- · Same fabric: 80/20 cotton/polyester
- · Similar weight (7.94 vs 8 oz)
- · Also Excellent for screen printing
- · Same fabric: 80/20 cotton/polyester
- · Also Excellent for screen printing
- · Covers S–4XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Heather Fabric
- Heather fabric is knit or woven from a blend of dyed and undyed fiber, creating a mottled two-tone look that usually signals polyester content.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.
- Brushed Fleece
- Brushed fleece is fleece mechanically brushed on the inside face to raise a soft, plush nap, without altering the smooth outer face used for printing.
- Double-lined hood
- A double-lined hood has a second layer of fabric sewn inside the outer shell, adding warmth, structure, and often a contrast-color interior.
- Kangaroo Pocket
- A kangaroo pocket is the single front pouch stitched onto a pullover hoodie, and its top edge sets the lower limit for any front print or design.