Shown: Royal
Youth Cool & Dry Mesh Piqué Polo
A blank polo from the UltraClub line, offered in Royal in size XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% polyester at 4.4 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Royal
Royal
Available sizes
Availability — Royal
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XL | Limited | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 4.4 oz/yd²
- Fabric type
- piqué
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Youth
- Fit
- Not stated
- Sizes
- XL
- Colors
- 1
- Country of origin
- Peru
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured piqué surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat piqué surface reduces DTG detail.
Embroidery
Excellent
Structured piqué holds stitches cleanly — the classic embroidery surface.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for youth wear · sizes XL.
Garment measurements in inches, laid flat.
| Measurement | XL |
|---|---|
| Body Length | 25 1/2 |
| Chest Width (Laid Flat) | 20 1/2 |
| Sleeve Length | 14 |
Fabric and construction
Manufacturer highlights
- 4.4 oz./yd², 100% polyester mesh piqué
- Moisture-management properties
- UPF 40+ protection
- Pill-resistant
- Fully taped flat rib-knit collar
- Three-button placket with dyed-to-match buttons
- Double-needle flat-lock stitching at shoulders
- Half-moon patch
Country of origin
Made in Peru.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (4.1 vs 4.4 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (4 vs 4.4 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4.5 vs 4.4 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Also Excellent for sublimation
- · Covers S–XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Mesh
- Mesh is an open-construction knit fabric with visible holes for airflow, used in athletic jerseys, cap back panels, and moisture-wicking gear.
- Piqué
- Piqué is a woven-look knit with a raised, waffle-textured face, most familiar as the classic polo-shirt fabric, structured enough that printers usually route it to embroidery.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Locker Patch (Half-Moon Patch)
- A locker patch, or half-moon patch, is a curved fabric panel sewn at the inside back neck of a garment, a construction cue often paired with small embroidery.