Shown: Midnight Navy/ White
Under ArmourStyle 1377376 · Polos
Men's 3.0 Striped Perf Polo
A blank polo from the Under Armour line, offered in Midnight Navy/ White in size 3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 93/7 recycled polyester/elastane at 6.7 oz/yd²
- Recycled content
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Midnight Navy/ White
Midnight Navy/ White
Available sizes
Availability — Midnight Navy/ White
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| 3XL | Low Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 93/7 recycled polyester/elastane
- Fabric weight
- 6.7 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- 3XL
- Colors
- 1
- Country of origin
- Mexico
- Sustainability
- Recycled content
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes 3XL.
Garment measurements in inches, laid flat.
| Measurement | 3XL |
|---|---|
| Body Length | 31 |
| Chest Width (Laid Flat) | 25 |
| Sleeve Length | 11 |
Fabric and construction
Manufacturer highlights
- 6.7 oz., 93/7 recycled polyester/elastane
- Moisture-wicking performance
- UPF 40+ protection
- Anti-odor technology
- Four-way stretch fabric for increased mobility
- Soft anti-pick, anti-pill fabric has a snag-free finish
- Flat knit ribbed collar
- Updated placket with low-profile buttons for a modern, clean look
- Responsible Materials: contains 93% recycled polyester
About this blank
Under Armour products purchased must be resold only with embellishment. Sale of Under Armour on the internet or elsewhere without embellishment is strictly prohibited. Failure to comply with these policies will result in loss of privileges for selling this brand.
Country of origin
Made in Mexico.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Similar weight (7.1 vs 6.7 oz)
- · Also Excellent for embroidery
- · Covers S–4XL
- · Similar weight (6.5 vs 6.7 oz)
- · Also Excellent for embroidery
- · Covers S–3XL
- · Similar weight (6.52 vs 6.7 oz)
- · Also Excellent for embroidery
- · Covers S–3XL
- · Similar weight (6.4 vs 6.7 oz)
- · Also Excellent for embroidery
- · Covers S–4XL
Terms used on this page
- Recycled Polyester (rPET)
- Recycled polyester (rPET) is polyester fiber re-extruded from reclaimed plastic, mostly PET bottles, performing like virgin poly while supporting a garment's sustainability claim.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Odor-Resistant
- Odor-resistant fabric carries an antimicrobial treatment — usually silver ion or a branded finish like Polygiene — that slows the bacteria causing sweat smell between washes.
- Anti-Pilling
- Anti-pilling is a fabric finish or yarn construction that keeps loose fibers from tangling into the small fuzzy balls that form on fleece and knit blends.
- Ribbed Collar
- A ribbed collar is a stretchy rib-knit neckband, usually 1x1 rib, whose recovery after stretching depends heavily on how much spandex is blended in.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.