Shown: Black
Unisex Spun Dyed Hooded Sweatshirt
A blank hooded sweatshirt from the TriDri line, offered in 2 colors and sizes XS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% recycled polyester at 8 oz/yd²
- Recycled content
- Tear-away label for rebranding
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 2— Black
Black
Grey Melange
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | In Stock | — | |
| S | In Stock | — | |
| M | In Stock | — | |
| 3XL | Low Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% recycled polyester
- Fabric weight
- 8 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- XS–3XL
- Colors
- 2
- Country of origin
- China
- Sustainability
- Recycled content; OEKO-TEX certified facility
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes XS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| Body Length | 26 2/3 | 27 1/2 | 28 1/3 | 29 1/9 | 29 8/9 | 30 2/3 | 31 1/2 |
| Chest Width (Laid Flat) | 19 1/3 | 20 8/9 | 22 2/5 | 24 | 25 3/5 | 27 1/5 | 28 2/3 |
| Sleeve Length | 24 2/5 | 24 4/5 | 25 1/9 | 25 1/2 | 25 8/9 | 26 1/3 | 26 2/3 |
Fabric and construction
Manufacturer highlights
- 8 oz./yd².,100% recycled polyester
- Wicking fabric technology
- Double-panel hood
- Pouch pocket
- Tear away label
- Responsible Materials: contains 100% recycled polyester
About this blank
Responsible Supplier: this product was made in a facility that is OCS, GRS, RCS and OEKO-TEX certified.
Country of origin
Made in China.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% recycled polyester
- · Similar weight (8 vs 8 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% recycled polyester
- · Also Excellent for embroidery
- · Covers XS–4XL
- · Same fabric: 100% recycled polyester
- · Also Excellent for embroidery
- · Covers XS–4XL
- · Same fabric: 100% recycled polyester
- · Also Excellent for embroidery
- · Covers XS–4XL
Terms used on this page
- Recycled Polyester (rPET)
- Recycled polyester (rPET) is polyester fiber re-extruded from reclaimed plastic, mostly PET bottles, performing like virgin poly while supporting a garment's sustainability claim.
- Moisture-Wicking Fabric
- Moisture-wicking fabric, almost always polyester, pulls sweat away from skin to its outer surface for fast evaporation, unlike absorbent cotton.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- OEKO-TEX Standard 100
- OEKO-TEX Standard 100 is a certification testing finished textile products for harmful substances against limits stricter than most legal requirements.