Shown: Athletic Heather
Unisex Zone HydroSport™ Heavyweight Hooded Sweatshirt
A blank hooded sweatshirt from the Team 365 line, offered in 8 colors and sizes XS–6XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 50/50 cotton/polyester at 11 oz/yd²
- 10-size run (XS–6XL)
- Fair Labor Association
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 8— Athletic Heather
Athletic Heather
Black
Dark Grey Heather
Safety Yellow
Sport Dark Green
Sport Dark Navy
Sport Red
Sport Royal
Available sizes
Availability — Athletic Heather
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Limited | — | |
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | In Stock | — | |
| 4XL | Limited | — | |
| 5XL | Limited | — | |
| 6XL | In Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/50 cotton/polyester
- Fabric weight
- 11 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- XS–6XL
- Colors
- 8
- Country of origin
- Pakistan
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes XS–6XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL | 4XL | 5XL | 6XL |
|---|---|---|---|---|---|---|---|---|---|---|
| Body Length | 26 1/2 | 27 2/3 | 28 1/2 | 29 1/2 | 30 1/2 | 31 | 32 | 33 | 34 | 34 1/2 |
| Chest Width (Laid Flat) | 19 1/4 | 20 3/4 | 22 1/4 | 23 3/4 | 25 1/4 | 26 3/4 | 28 1/4 | 29 3/4 | 31 1/4 | 32 3/4 |
| Sleeve Length | 32 1/2 | 33 1/2 | 34 1/2 | 35 1/2 | 36 1/2 | 37 | 38 | 39 | 40 | 40 1/2 |
Fabric and construction
Manufacturer highlights
- 11 oz./yd² (US), 18.4 oz./L yd (CA), 70/30 cotton, polyester crossweave fleece
- Safety Yellow is 50/50 cotton/polyester
- Team fit
- Zone HydroSport provides durable water-repellent (DWR) protection for added defense against wet conditions
- Three-piece self-lined hood
- Dyed-to-match flat braided drawcord at hood
- Front pouch with media pocket
- Matching knit trim at cuff and hem
- Locker loop main label
- Responsible Supplier: this product was made in a facility that is FLA certified
Country of origin
Made in Pakistan.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Same fabric: 50/50 cotton/polyester
- · Also Excellent for embroidery
- · Same fabric: 50/50 cotton/polyester
- · Also Excellent for embroidery
- · Covers XS–5XL
- · Similar fiber mix
- · Similar weight (11 vs 11 oz)
- · Also Excellent for embroidery
- · Same fabric: 50/50 cotton/polyester
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.