Shown: Black
Team 365Style TT200W · Hoodies
Women's Qualify Quarter-Zip Hooded Pullover
A blank hooded sweatshirt from the Team 365 line, offered in 5 colors and sizes XS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 91/9 recycled polyester/spandex drop needle at 6 oz/yd²
- Recycled content
- Tear-away label for rebranding
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 5— Black
Black
Sport Dark Navy
Sport Graphite
Sport Red
Sport Royal
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Limited | — | |
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 91/9 recycled polyester/spandex drop needle
- Fabric weight
- 6 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- XS–3XL
- Colors
- 5
- Country of origin
- Viet Nam
- Sustainability
- Recycled content; Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes XS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| Body Length | 22 1/2 | 23 1/2 | 24 1/2 | 25 1/2 | 26 1/2 | 27 1/2 | 29 |
| Chest Width (Laid Flat) | 18 1/4 | 19 1/4 | 20 1/4 | 21 1/4 | 22 1/4 | 24 1/4 | 26 1/4 |
| Sleeve Length | 30 1/2 | 31 1/2 | 32 1/2 | 33 1/2 | 34 1/2 | 35 1/2 | 37 |
Fabric and construction
Manufacturer highlights
- 6 oz/yd², 91/9 Recycled Polyester/Spandex drop needle
- Team fit
- Moisture wicking performance pulls sweat away from the skin to keep you dry and comfortable
- Antimicrobial performance properties fight odor-causing bacteria to keep your gear fresher for longer
- Three piece rollaway hood
- Center front coil zipper with rubber pull
- Matching binding details
- Self fabric thumbholes
- Tear away label
- Responsible Materials: contains recycled polyester
- Responsible Supplier: this product was made in a facility that is FLA certified
Country of origin
Made in Viet Nam.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 91/9 recycled polyester/spandex drop needle
- · Similar weight (6 vs 6 oz)
- · Also Excellent for embroidery
- · Similar weight (6.49 vs 6 oz)
- · Also Excellent for embroidery
- · Covers XS–2XL
- · Similar weight (6.49 vs 6 oz)
- · Also Excellent for embroidery
- · Covers XS–2XL
- · Similar weight (6.5 vs 6 oz)
- · Also Excellent for embroidery
Terms used on this page
- Ounces per square yard (oz/yd²)
- Ounces per square yard (oz/yd²) is the US fabric-weight spec printed on nearly every blank’s product page, measuring how many ounces one square yard weighs.
- Recycled Polyester (rPET)
- Recycled polyester (rPET) is polyester fiber re-extruded from reclaimed plastic, mostly PET bottles, performing like virgin poly while supporting a garment's sustainability claim.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Moisture-Wicking Fabric
- Moisture-wicking fabric, almost always polyester, pulls sweat away from skin to its outer surface for fast evaporation, unlike absorbent cotton.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.