Shown: Athletic Heather/ White
Men's Relay Heathered Stripe Polo
A blank polo from the Team 365 line, offered in 6 colors and sizes XS–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 88/12 recycled polyester/spandex jersey at 5 oz/yd²
- 8-size run (XS–4XL)
- Recycled content
- Tear-away label for rebranding
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 6— Athletic Heather/ White
Athletic Heather/ White
Black Heather/ White
Sport Dark Navy Heather/ White
Sport Forest Heather/ White
Sport Maroon Heather/ White
Sport Royal Heather/ White
Available sizes
Availability — Athletic Heather/ White
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | In Stock | — | |
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | In Stock | — | |
| 4XL | In Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 88/12 recycled polyester/spandex jersey
- Fabric weight
- 5 oz/yd²
- Fabric type
- jersey
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- XS–4XL
- Colors
- 6
- Country of origin
- Cambodia
- Sustainability
- Recycled content; Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes XS–4XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|---|
| Body Length | 27 | 28 | 29 | 30 | 31 | 31 1/2 | 32 1/2 | 33 1/2 |
| Chest Width (Laid Flat) | 19 | 20 1/2 | 22 | 23 1/2 | 25 | 26 1/2 | 28 | 29 1/2 |
| Sleeve Length | 17 5/8 | 18 1/2 | 19 3/8 | 20 1/4 | 21 1/8 | 22 | 22 7/8 | 23 3/4 |
Fabric and construction
Manufacturer highlights
- 5 oz/yd², 88/12 recycled polyester/spandex jersey
- Team fit
- Moisture wicking performance pulls sweat away from the skin to keep you dry and comfortable
- Antimicrobial performance properties fight odor-causing bacteria to keep your gear fresher for longer
- Self fabric collar and integrated collar stays
- Three-button placket
- Tear away label
- Responsible Materials: contains recycled polyester
- Responsible Supplier: this product was made in a facility that is FLA certified
Country of origin
Made in Cambodia.
Shown for the Black Heather/ White colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 88/12 recycled polyester/spandex jersey
- · Similar weight (5 vs 5 oz)
- · Covers XS–3XL
- · Similar weight (5.3 vs 5 oz)
- · Covers S–4XL
- · Similar weight (5 vs 5 oz)
- · Covers S–4XL
- · Similar weight (5.1 vs 5 oz)
- · Covers S–4XL
Terms used on this page
- Ounces per square yard (oz/yd²)
- Ounces per square yard (oz/yd²) is the US fabric-weight spec printed on nearly every blank’s product page, measuring how many ounces one square yard weighs.
- Recycled Polyester (rPET)
- Recycled polyester (rPET) is polyester fiber re-extruded from reclaimed plastic, mostly PET bottles, performing like virgin poly while supporting a garment's sustainability claim.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Moisture-Wicking Fabric
- Moisture-wicking fabric, almost always polyester, pulls sweat away from skin to its outer surface for fast evaporation, unlike absorbent cotton.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.