
Shown: Black
TASC Performance IncStyle TW938 · Polos
Women's Air Lightweight Polo
A blank polo from the TASC Performance Inc line, offered in 5 colors and sizes XS–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 48/47/5 modal/polyester/elastane at 5.2 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 5— Black
Black
Black Heather
Classic Navy
Polar Heather
White
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Inventory Unavailable | — | |
| S | Inventory Unavailable | — | |
| M | Limited | — | |
| L | Limited | — | |
| XL | Low Stock | — | |
| 2XL | Inventory Unavailable | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 48/47/5 modal/polyester/elastane
- Fabric weight
- 5.2 oz/yd²
- Fabric type
- jersey
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Athletic/Fitted
- Sizes
- XS–2XL
- Colors
- 5
- Country of origin
- India
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Athletic/Fitted fit, cut for women's wear · sizes XS–2XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL |
|---|---|---|---|---|---|---|
| Body Length | 23 1/4 | 23 3/4 | 24 1/4 | 24 7/8 | 25 1/2 | 25 7/8 |
| Chest Width (Laid Flat) | 17 1/2 | 18 1/2 | 19 1/2 | 21 | 22 1/2 | 24 |
| Sleeve Length | 12 1/8 | 12 5/8 | 13 1/8 | 13 5/8 | 14 1/8 | 14 5/8 |
Fabric and construction
Manufacturer highlights
- 48/47/5 modal/polyester/elastane
- 5.2 oz./yd²., microspun jersey
- Light weight
- Moisture-wicking
- Semi-fitted feminine silhouette
- Self-collar and neck band
- Permanent stays sewn into collar points
- Side splits
- Two-button French front placket with Trocus shell buttons
- Reflective tab with drop logo folded over left sleeve hem
- Sewn in label at inner back neck
About this blank
Fabric and garments are manufactured in a facility 100% powered by solar and wind energy. Fabric and garments are manufactured in a GreenCo certified facility. 450g of CO2 are saved with the production of each garment.
TASC products purchased must be resold only with embellishment. Sale of TASC products on the internet or elsewhere without embellishment is strictly prohibited. Failure to comply with these policies will result in loss of privileges for selling this brand.
Country of origin
Made in India.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Similar weight (5.2 vs 5.2 oz)
- · Athletic/Fitted fit
- · Covers S–2XL
- · Similar weight (5 vs 5.2 oz)
- · Athletic/Fitted fit
- · Covers XS–3XL
- · Similar weight (5 vs 5.2 oz)
- · Athletic/Fitted fit
- · Covers S–5XL
- · Similar weight (5.2 vs 5.2 oz)
- · Athletic/Fitted fit
- · Covers S–4XL
Terms used on this page
- Modal
- Modal is a type of rayon made from beechwood pulp, spun to be stronger and less shrink-prone than standard viscose while staying exceptionally soft against skin.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Semi-Fitted
- Semi-fitted is a tapered cut that follows the body's natural lines without hugging it, sitting between boxy and slim on most brand size charts.
- Neckband
- A neckband is the ribbed strip of fabric sewn around a tee's neck opening to finish the raw edge and hold the collar's shape.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.