Shown: Blue Shadow
Men's Haven Piqué Polo
A blank polo from the Swannies line, offered in Blue Shadow and sizes S–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 92/8 repreve polyester/spandex piqu at 7 oz/yd²
- Fair Labor Association
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Blue Shadow
Blue Shadow
Available sizes
Availability — Blue Shadow
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Low Stock | — | |
| M | Limited | — | |
| L | In Stock | — | |
| XL | Limited | — | |
| 2XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 92/8 repreve polyester/spandex piqu
- Fabric weight
- 7 oz/yd²
- Fabric type
- piqué
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Athletic/Fitted
- Sizes
- S–2XL
- Colors
- 1
- Country of origin
- Thailand
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured piqué surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat piqué surface reduces DTG detail.
Embroidery
Excellent
Structured piqué holds stitches cleanly — the classic embroidery surface.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Athletic/Fitted fit, cut for men's wear · sizes S–2XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL |
|---|---|---|---|---|---|
| Body Length | 28 | 28 3/4 | 29 7/8 | 31 1/8 | 31 7/8 |
| Chest Width (Laid Flat) | 20 1/8 | 21 1/4 | 22 1/2 | 23 5/8 | 24 3/4 |
Fabric and construction
Manufacturer highlights
- 7 oz./yd², 92/8 REPREVE polyester/spandex piqué
- Athletic fit
- Moisture-management properties
- Three-button placket
- Straight hem
- Swannies logo on back neck
- Responsible Supplier: this product was made in a facility that is FLA certified
About this blank
Decoration of Swannies goods relating to golf courses, golf clubs, or golf country clubs are prohibited. All events including corporate, member, or charity events hosted at golf courses, golf clubs, or golf country clubs must be cleared by Swannies Golf Apparel in advance. In addition, decoration of Swannies goods relating to colleges, universities, collegiate sports teams are prohibited unless cleared by Swannies beforehand. Swannies goods may only be sold decorated. Failing to comply with these policies may result in loss of privileges for selling the Swannies brand.
Country of origin
Made in Thailand.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 92/8 repreve polyester/spandex piqu
- · Similar weight (7 vs 7 oz)
- · Athletic/Fitted fit
- · Same fabric: 92/8 repreve polyester/spandex piqu
- · Similar weight (7 vs 7 oz)
- · Athletic/Fitted fit
- · Similar weight (7 vs 7 oz)
- · Athletic/Fitted fit
- · Also Excellent for embroidery
- · Similar weight (7 vs 7 oz)
- · Athletic/Fitted fit
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Piqué
- Piqué is a woven-look knit with a raised, waffle-textured face, most familiar as the classic polo-shirt fabric, structured enough that printers usually route it to embroidery.
- Athletic Fit
- Athletic fit is a T-shirt pattern with a fuller chest and shoulder cut that tapers down to a narrower waist, built for muscular or broad-shouldered builds.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.