Shown: Surf
Men's Drift Polo
A blank polo from the Swannies line, offered in Surf and sizes S–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% repreve polyester at 7 oz/yd²
- Fair Labor Association
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Surf
Surf
Available sizes
Availability — Surf
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | — | |
| M | Limited | — | |
| L | Limited | — | |
| XL | Limited | — | |
| 2XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% repreve polyester
- Fabric weight
- 7 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Athletic/Fitted
- Sizes
- S–2XL
- Colors
- 1
- Country of origin
- Thailand
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Athletic/Fitted fit, cut for men's wear · sizes S–2XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL |
|---|---|---|---|---|---|
| Body Length | 28 | 28 3/4 | 29 7/8 | 31 1/8 | 31 7/8 |
| Chest Width (Laid Flat) | 20 1/8 | 21 1/4 | 22 1/2 | 23 5/8 | 24 3/4 |
Fabric and construction
Manufacturer highlights
- 7 oz./yd², 100% REPREVE polyester
- Athletic fit
- Moisture-management properties
- Three-button placket
- Swannies logo on back neck
- Responsible Supplier: this product was made in a facility that is FLA certified
About this blank
Decoration of Swannies goods relating to golf courses, golf clubs, or golf country clubs are prohibited. All events including corporate, member, or charity events hosted at golf courses, golf clubs, or golf country clubs must be cleared by Swannies Golf Apparel in advance. In addition, decoration of Swannies goods relating to colleges, universities, collegiate sports teams are prohibited unless cleared by Swannies beforehand. Swannies goods may only be sold decorated. Failing to comply with these policies may result in loss of privileges for selling the Swannies brand.
Country of origin
Made in Thailand.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% repreve polyester
- · Similar weight (7 vs 7 oz)
- · Athletic/Fitted fit
- · Same fabric: 100% repreve polyester
- · Similar weight (7 vs 7 oz)
- · Athletic/Fitted fit
- · Same fabric: 100% repreve polyester
- · Similar weight (7 vs 7 oz)
- · Athletic/Fitted fit
- · Same fabric: 100% repreve polyester
- · Similar weight (7 vs 7 oz)
- · Athletic/Fitted fit
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Athletic Fit
- Athletic fit is a T-shirt pattern with a fuller chest and shoulder cut that tapers down to a narrower waist, built for muscular or broad-shouldered builds.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.