Shown: Black Frost
SpyderStyle S17916 · More Styles
Men's Spyre Quarter-Zip Pullover
A blank garment from the Spyder line, offered in 3 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 89/11 polyester/spandex at 5.3 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— Black Frost
Black Frost
Frontier Frost
Polar Frost
Available sizes
Availability — Black Frost
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | — | |
| M | Limited | — | |
| L | Limited | — | |
| XL | Limited | — | |
| 2XL | Limited | — | |
| 3XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 89/11 polyester/spandex
- Fabric weight
- 5.3 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 3
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 28 1/4 | 29 | 29 3/4 | 30 1/2 | 31 1/4 | 32 |
| Chest Width (Laid Flat) | 19 1/2 | 21 | 22 1/2 | 24 | 25 1/2 | 27 |
| Sleeve Length | 33 1/8 | 34 3/8 | 35 | 35 5/8 | 36 1/4 | 36 7/8 |
Fabric and construction
Manufacturer highlights
- 5.3 oz/yd²., 89/11 polyester/spandex
- UPF 40+ protection
- Four-way stretch fabric for increased mobility
- Rich, cotton-like feel
- Stand-up collar with reverse coil zipper
- Side gussets for added mobility
- Side vents for added mobility and ventilation
- Back dart for a better fit
- Debossed 'Spyder' neck tape
- Iconic rubberized Spyder bug logo at left sleeve
- Rubberized Spyder wordmark at center back
About this blank
Spyder products purchased must be resold only with embellishment. Sale of Spyder on the internet or elsewhere without embellishment is strictly prohibited. Failure to comply with these policies will result in loss of privileges for selling this brand.
Country of origin
Made in China.
Shown for the Black Frost colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 89/11 polyester/spandex
- · Similar weight (5.3 vs 5.3 oz)
- · Covers S–3XL
- · Same fabric: 89/11 polyester/spandex
- · Similar weight (5.3 vs 5.3 oz)
- · Covers XS–2XL
- · Similar weight (5.3 vs 5.3 oz)
- · Covers S–4XL
- · Similar weight (4.9 vs 5.3 oz)
- · Covers S–4XL
Terms used on this page
- Ounces per square yard (oz/yd²)
- Ounces per square yard (oz/yd²) is the US fabric-weight spec printed on nearly every blank’s product page, measuring how many ounces one square yard weighs.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.