Shown: Black
SpyderStyle S18027 · More Styles
Men's Xtryme Half-Zip Pullover
A blank garment from the Spyder line, offered in 3 colors and sizes S–L. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 61/36/3 polyester/rayon/spandex at 7.7 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— Black
Black
Frontier
Polar
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Low Stock | — | |
| M | Low Stock | — | |
| L | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 61/36/3 polyester/rayon/spandex
- Fabric weight
- 7.7 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–L
- Colors
- 3
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–L.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 27 1/4 | 28 | 28 3/4 | 29 1/2 | 30 1/4 | 31 |
| Chest Width (Laid Flat) | 20 | 21 1/2 | 23 | 24 1/2 | 26 | 27 1/2 |
| Sleeve Length | 36 3/4 | 37 3/8 | 38 | 38 5/8 | 39 1/4 | 39 7/8 |
Fabric and construction
Manufacturer highlights
- 7.7 oz./yd²., 61/36/3 polyester/rayon/spandex
- Debossed Spyder neck tape
- Stylized Spyder seam detail
- Side vents
- Metal zipper
- Locker loop
- Spyder wordmark embroidered on back
- Iconic Spyder 'Bug' logo embroidered on sleeve
About this blank
Spyder products purchased must be resold only with embellishment. Sale of Spyder on the internet or elsewhere without embellishment is strictly prohibited. Failure to comply with these policies will result in loss of privileges for selling this brand.
Country of origin
Made in China.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Same fabric: 61/36/3 polyester/rayon/spandex
- · Similar weight (7.7 vs 7.7 oz)
- · Also Excellent for embroidery
- · Similar weight (7.2 vs 7.7 oz)
- · Also Excellent for embroidery
- · Covers S–4XL
- · Similar weight (7.2 vs 7.7 oz)
- · Also Excellent for embroidery
- · Covers S–3XL
- · Similar weight (8 vs 7.7 oz)
- · Also Excellent for embroidery
- · Covers XS–4XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Rayon (Viscose)
- Rayon (viscose) is a semi-synthetic fiber made by dissolving wood pulp cellulose and re-spinning it into filament, prized for a silky drape neither cotton nor polyester can match.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.