Shown: Grey
Red KapStyle SP5A · More Styles
Women's Airflow Long Sleeve Work Shirt
A blank garment from the Red Kap line, offered in Grey and sizes S–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 65/35 polyester/cotton at 4.3 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ DTF transfer and Embroidery and Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Grey
Grey
Available sizes
Availability — Grey
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | — | |
| M | Limited | — | |
| L | Limited | — | |
| XL | Limited | — | |
| 2XL | Limited | — | |
| 3XL | Limited | — | |
| 4XL | Limited | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 65/35 polyester/cotton
- Fabric weight
- 4.3 oz/yd²
- Fabric type
- mesh
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- S–4XL
- Colors
- 1
- Country of origin
- Honduras
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Conditional
Open or slick mesh surface — adhesion varies; run a wash test first.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat mesh surface reduces DTG detail.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes S–4XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|
| Body Length Back | 27 1/8 | 27 1/2 | 27 7/8 | 28 1/4 | 28 5/8 | 29 | 29 3/8 |
| Chest Circumference | 41 1/2 | 44 | 47 | 51 | 55 | 59 | 63 |
| Sleeve Length (From Center Back) | 31 1/2 | 32 1/8 | 32 3/4 | 33 3/8 | 33 7/8 | 34 3/8 | 34 7/8 |
Fabric and construction
Manufacturer highlights
- 4.3 oz./yd², 65/35 polyester/cotton
- 4.2 oz./yd², 100% polyester mesh back
- Tailored fit
- Powered by Touchtex™ technology: stain-resistant, wrinkle-resistant, and fade-resistant
- Moisture-management properties
- Mesh-lined banded collar with sewn-in stays
- Six concealed grippers
- Buttoned right chest pocket
- Left chest pocket
- Utility pocket on left sleeve
Country of origin
Made in Honduras.
Recommended applications
- Contractor apparel →
Workwear-grade construction.
- Fitness →
Moisture-management fabric for active wear.
- Hospitality →
Built for kitchen and front-of-house programs.
Similar alternatives
- · Same fabric: 65/35 polyester/cotton
- · Similar weight (4.3 vs 4.3 oz)
- · Covers S–5XL
- · Same fabric: 65/35 polyester/cotton
- · Similar weight (4.25 vs 4.3 oz)
- · Covers S–4XL
- · Same fabric: 65/35 polyester/cotton
- · Similar weight (4.25 vs 4.3 oz)
- · Covers XS–3XL
- · Same fabric: 65/35 polyester/cotton
- · Similar weight (4.3 vs 4.3 oz)
- · Workwear-tier peer
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Mesh
- Mesh is an open-construction knit fabric with visible holes for airflow, used in athletic jerseys, cap back panels, and moisture-wicking gear.
- Wrinkle Resistance
- Wrinkle resistance is a fiber blend or chemical finish that keeps fabric from creasing, letting shirts come off the shelf looking pressed and stay that way.