Shown: Black
Red KapStyle SP14T · More Styles
Men's Tall Industrial Long Sleeve Work Shirt
A blank garment from the Red Kap line, offered in 23 colors and sizes LT–4XLT. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 65/35 polyester/cotton at 4.3 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery and Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 23— Black
Black
Blue/ Charcoal Microcheck
Burgundy
Charcoal
Charcoal/ Red/ White Stripe
Chocolate Brown
Dark Blue
Denim Blue Microcheck
Grey
Grey/ Blue Stripe
Light Blue
Light Green
Light Grey
Light Tan
Navy
NL-Navy/ Light Blue
Orange
Petrol Blue
Postman Blue
Red
Silver Grey
Spruce Green
White
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| LT | In Stock | — | |
| XLT | In Stock | — | |
| 2XLT | In Stock | — | |
| 3XLT | Limited | — | |
| 4XLT | Inventory Unavailable | — |
Last inventory sync: July 14, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 65/35 polyester/cotton
- Fabric weight
- 4.3 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- LT–4XLT
- Colors
- 23
- Country of origin
- Honduras
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes LT–4XLT.
Garment measurements in inches, laid flat.
| Measurement | ST | MT | LT | XLT | 2XLT | 3XLT | 4XLT | 5XLT | 6XLT |
|---|---|---|---|---|---|---|---|---|---|
| Body Length Back | 33 1/2 | 33 7/8 | 34 1/8 | 34 3/8 | 34 5/8 | 34 7/8 | 35 1/8 | 35 3/8 | 35 1/2 |
| Chest Circumference | 42 | 46 | 50 | 54 | 57 | 60 | 63 | 66 | 69 |
| Sleeve Length (From Center Back) | 35 3/4 | 36 1/4 | 36 3/4 | 37 1/4 | 37 3/4 | 38 1/4 | 38 3/4 | 39 1/4 | 39 1/2 |
Fabric and construction
Manufacturer highlights
- Solids & striped are 4.3 oz./yd², 65/35 polyester/cotton
- Microcheck colors are 3.8 oz./yd², 65/35 polyester/cotton
- Soil-release
- Moisture-management properties
- Two-piece collar with sewn-in stays
- Six buttons plus gripper at neck
- Two button-through hex-style pockets with angled bartacks
- Bartacked pencil stall on left pocket
- Regular sizes available under style SP14
- Enhanced visibility style available SP14E
Country of origin
Made in Honduras.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Workwear-grade construction.
- Fitness →
Moisture-management fabric for active wear.
- Schools and teams →
Performance knit in 23 team colors.
- Hospitality →
Built for kitchen and front-of-house programs.
Similar alternatives
- · Same fabric: 65/35 polyester/cotton
- · Similar weight (4.3 vs 4.3 oz)
- · Workwear-tier peer
- · Same fabric: 65/35 polyester/cotton
- · Similar weight (4.25 vs 4.3 oz)
- · Workwear-tier peer
- · Same fabric: 65/35 polyester/cotton
- · Similar weight (4.25 vs 4.3 oz)
- · Workwear-tier peer
- · Same fabric: 65/35 polyester/cotton
- · Similar weight (4.3 vs 4.3 oz)
- · Workwear-tier peer
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.