Shown: White
Red KapStyle KT33 · Jackets & Vests
Women's Staff Coat
A blank jacket from the Red Kap line, offered in White and sizes XS–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 80/20 polyester/cotton at 6 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— White
White
Available sizes
Availability — White
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | In Stock | — | |
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 80/20 polyester/cotton
- Fabric weight
- 6 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- XS–2XL
- Colors
- 1
- Country of origin
- Honduras
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes XS–2XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL |
|---|---|---|---|---|---|---|
| Bust | 31 1/2 - 33 | 33 1/2 - 35 | 35 1/2 - 37 1/2 | 38 - 40 1/2 | 41 1/2 - 44 1/2 | 45 1/2 - 48 1/2 |
| Hip | 33 - 34 1/2 | 35 - 36 1/2 | 37 - 39 | 39 1/2 - 42 | 42 1/2 - 46 | 46 1/2 - 50 |
| Waist Laid Flat | 23 1/2 - 25 | 25 1/2 - 27 | 27 1/2 - 29 1/2 | 30 - 32 1/2 | 33 - 36 1/2 | 37 - 40 1/2 |
Fabric and construction
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Same fabric: 80/20 polyester/cotton
- · Covers S–3XL
- · Workwear-tier peer
- · Similar fiber mix
- · Also Excellent for embroidery
- · Covers S–2XL
- · Similar fiber mix
- · Also Excellent for embroidery
- · Covers S–3XL
- · Similar fiber mix
- · Covers S–4XL
- · Workwear-tier peer
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.