Shown: Light Blue
Red KapStyle 5080 · Jackets & Vests
Unisex Lab Coat
A blank jacket from the Red Kap line, offered in 2 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 80/20 polyester/cotton at 5 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 2— Light Blue
Light Blue
White
Available sizes
Availability — Light Blue
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | In Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 80/20 polyester/cotton
- Fabric weight
- 5 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 2
- Country of origin
- Honduras
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Chest Circumference | 36 - 38 | 40 - 42 | 44 - 46 | 48 - 50 | 52 - 54 | 56 - 58 |
| Sleeve Length | 32 1/2 | 33 1/4 | 34 | 34 3/4 | 35 1/2 | 36 1/4 |
Fabric and construction
Manufacturer highlights
- 5 oz./yd², 80/20 polyester/cotton
- Performance blend
- Wrinkle-resistant
- Pre-cure durable press
- One-piece, notched lapel collar
- Four grippers closure
- Internal left chest pocket
- Two lower front pockets
- Side vents
- Length is 41 1/2"
Country of origin
Made in Honduras.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Workwear-grade construction.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Similar fiber mix
- · Similar weight (5 vs 5 oz)
- · Covers S–4XL
- · Similar fiber mix
- · Similar weight (5 vs 5 oz)
- · Covers S–3XL
- · Same fabric: 80/20 polyester/cotton
- · Covers XS–2XL
- · Workwear-tier peer
- · Similar fiber mix
- · Similar weight (5 vs 5 oz)
- · Workwear-tier peer
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Wrinkle Resistance
- Wrinkle resistance is a fiber blend or chemical finish that keeps fabric from creasing, letting shirts come off the shelf looking pressed and stay that way.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.