Shown: Camo
RealTreeStyle RT5302 · Hoodies
Unisex Realtree® Performance Hooded Sweatshirt
A blank hooded sweatshirt from the RealTree line, offered in Camo and sizes XS–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% recycled polyester at 6.5 oz/yd²
- 8-size run (XS–4XL)
- Recycled content
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Camo
Camo
Available sizes
Availability — Camo
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Limited | Available | |
| S | In Stock | Available | |
| M | In Stock | Available | |
| L | In Stock | Available | |
| XL | In Stock | Available | |
| 2XL | In Stock | Available | |
| 3XL | In Stock | Available | |
| 4XL | Low Stock | Available |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% recycled polyester
- Fabric weight
- 6.5 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Relaxed
- Sizes
- XS–4XL
- Colors
- 1
- Country of origin
- Jordan
- Sustainability
- Recycled content
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Relaxed fit, cut for unisex wear · sizes XS–4XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|---|
| Body Length | 27 | 28 | 29 | 30 | 31 | 31 1/2 | 32 1/2 | 33 1/2 |
| Chest Width (Laid Flat) | 19 | 21 | 23 | 24 1/2 | 26 | 28 | 29 3/4 | 31 3/4 |
| Sleeve Length (From Center Back) | 33 1/2 | 34 1/4 | 35 | 35 3/4 | 36 1/2 | 36 3/4 | 37 3/8 | 38 |
Fabric and construction
Manufacturer highlights
- 6.5 oz./yd², 100% recycled polyester interlock
- Realtree® APX pattern
- Moisture-management performance
- Regular, relaxed fit
- Double-lined hood with corded drawcords
- Front pouch pocket
- Knit sleeve cuffs
- UPF 30+ protection
- Responsible Materials: contains recycled polyester
Country of origin
Made in Jordan.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% recycled polyester
- · Similar weight (6.5 vs 6.5 oz)
- · Relaxed fit
- · Same fabric: 100% recycled polyester
- · Similar weight (6.5 vs 6.5 oz)
- · Relaxed fit
- · Same fabric: 100% recycled polyester
- · Similar weight (6.5 vs 6.5 oz)
- · Relaxed fit
- · Same fabric: 100% recycled polyester
- · Similar weight (6.49 vs 6.5 oz)
- · Relaxed fit
Terms used on this page
- Recycled Polyester (rPET)
- Recycled polyester (rPET) is polyester fiber re-extruded from reclaimed plastic, mostly PET bottles, performing like virgin poly while supporting a garment's sustainability claim.
- Interlock Knit
- Interlock knit is a double-knit fabric formed by interlocking two 1x1 rib layers back-to-back, giving a smooth, identical face on both sides.
- Relaxed Fit
- Relaxed fit adds extra ease through the chest and body beyond a classic cut, without going as wide or long as an oversized silhouette.
- Double-lined hood
- A double-lined hood has a second layer of fabric sewn inside the outer shell, adding warmth, structure, and often a contrast-color interior.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.
- Kangaroo Pocket
- A kangaroo pocket is the single front pouch stitched onto a pullover hoodie, and its top edge sets the lower limit for any front print or design.