Shown: Black/ White
Under ArmourStyle 6010886 · Hoodies
Men's Armour Fleece Pro Hooded Full-Zip
A blank hooded sweatshirt from the Under Armour line, offered in 3 colors and sizes S–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% recycled polyester at 6.49 oz/yd²
- Recycled content
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— Black/ White
Black/ White
Midnight Navy/ White
Mod Grey/ White
Available sizes
Availability — Black/ White
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | Limited | — | |
| 4XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% recycled polyester
- Fabric weight
- 6.49 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tagless
- Cut for
- Men's
- Fit
- Relaxed
- Sizes
- S–4XL
- Colors
- 3
- Country of origin
- Jordan
- Sustainability
- Recycled content
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Relaxed fit, cut for men's wear · sizes S–4XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|
| Body Length | 27 1/2 | 28 | 28 1/2 | 29 1/2 | 30 1/2 | 31 1/2 | 32 1/2 |
| Chest Width (Laid Flat) | 21 1/2 | 23 | 24 1/2 | 26 | 27 1/2 | 29 | 30 1/2 |
| Sleeve Length | 25 3/4 | 26 1/4 | 26 3/4 | 27 1/4 | 27 3/4 | 28 1/4 | 28 3/4 |
Fabric and construction
Manufacturer highlights
- 6.49 oz/yd²., 100% recycled polyester
- UA Storm technology repels water without sacrificing breathability
- Softer, more plush inner layer traps heat to keep you warm & comfortable
- Updated Armour Fleece® is slightly heavier but still breathable & stretchy
- Loose fit: comfortably away from the skin
- Open hand pockets
- Binding trim at cuffs
- Contrast brand logo on left shoulder
- Pad-printed label
- Responsible Materials: contains recycled polyester
- To prevent shrinking during printing, the flash dryer must be set to 260°F for 1 second
About this blank
Under Armour products purchased must be resold only with embellishment. Sale of Under Armour on the internet or elsewhere without embellishment is strictly prohibited. Failure to comply with these policies will result in loss of privileges for selling this brand.
Country of origin
Made in Jordan.
Shown for the Black/ White colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 100% recycled polyester
- · Similar weight (6.49 vs 6.49 oz)
- · Relaxed fit
- · Same fabric: 100% recycled polyester
- · Similar weight (6.5 vs 6.49 oz)
- · Relaxed fit
- · Same fabric: 100% recycled polyester
- · Similar weight (6.5 vs 6.49 oz)
- · Relaxed fit
- · Same fabric: 100% recycled polyester
- · Similar weight (6.5 vs 6.49 oz)
- · Relaxed fit
Terms used on this page
- Ounces per square yard (oz/yd²)
- Ounces per square yard (oz/yd²) is the US fabric-weight spec printed on nearly every blank’s product page, measuring how many ounces one square yard weighs.
- Recycled Polyester (rPET)
- Recycled polyester (rPET) is polyester fiber re-extruded from reclaimed plastic, mostly PET bottles, performing like virgin poly while supporting a garment's sustainability claim.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Hand (Hand Feel)
- Hand, or hand feel, is shop shorthand for how a finished print or fabric feels to the touch, the quality behind every request for a softer print.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.