Shown: Navy Blazer Heather
Puma GolfStyle 535500 · Sweatshirts
Men's Cloudspun Crewneck Sweatshirt
A blank crewneck sweatshirt from the Puma Golf line, offered in 2 colors and sizes S–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 84/16 recycled polyester/elastane at 7.05 oz/yd²
- Recycled content
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 2— Navy Blazer Heather
Navy Blazer Heather
Puma Black
Available sizes
Availability — Navy Blazer Heather
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 84/16 recycled polyester/elastane
- Fabric weight
- 7.05 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–2XL
- Colors
- 2
- Country of origin
- Viet Nam
- Sustainability
- Recycled content
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–2XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 28 | 28 2/5 | 29 1/5 | 30 | 30 4/5 | 32 |
| Chest Width (Laid Flat) | 21 1/5 | 22 4/5 | 24 2/5 | 26 2/5 | 28 2/5 | 30 2/5 |
| Sleeve Length | 25 3/5 | 26 | 26 2/5 | 27 1/5 | 28 | 28 2/5 |
Fabric and construction
Manufacturer highlights
- 7.05 oz. (US), 11.7 oz./L yd (CA), 84/16 recycled polyester/elastane
- Moisture-wicking performance
- UPF 50+ protection
- Four-way stretch fabric for increased mobility
- Circular knit
- Golf tipped drawcord
- Zippered stash pocket on left hem
- Responsible Supplier: this product was made in a facility that is GRS and RCS certified
- Responsible Materials: contains 84% recycled polyester
About this blank
Puma products purchased must be resold only with embellishment. Sale of Puma products on the internet or elsewhere without embellishment is strictly prohibited. Failure to comply with these policies will result in loss of privileges for selling this brand.
Country of origin
Made in Viet Nam.
Shown for the Navy Blazer Heather colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Similar weight (7 vs 7.05 oz)
- · Also Excellent for embroidery
- · Covers XS–3XL
- · Similar weight (7.5 vs 7.05 oz)
- · Also Excellent for embroidery
- · Covers S–2XL
- · Similar weight (7.1 vs 7.05 oz)
- · Also Excellent for embroidery
- · Covers S–3XL
- · Similar weight (7 vs 7.05 oz)
- · Also Excellent for embroidery
- · Covers S–2XL
Terms used on this page
- Recycled Polyester (rPET)
- Recycled polyester (rPET) is polyester fiber re-extruded from reclaimed plastic, mostly PET bottles, performing like virgin poly while supporting a garment's sustainability claim.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- UPF (Ultraviolet Protection Factor)
- UPF rates how much UV radiation a fabric blocks, from 15 (good) to 50+ (excellent, blocking over 97.5% of rays), tested under AATCC 183.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.
- Recycled Claim Standard (RCS)
- The Recycled Claim Standard (RCS) is a certification verifying the percentage of recycled material in a product without added environmental or social criteria.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.