Shown: Blackout
OakleyStyle FOA402994 · Hoodies
Men's Team Issue Hydrolix Hooded Sweatshirt
A blank hooded sweatshirt from the Oakley line, offered in 6 colors and sizes S–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% polyester at 8.8 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 6— Blackout
Blackout
Carolina Blue
Forged Iron
New Granite Heather
Team Navy
White
Available sizes
Availability — Blackout
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | Available | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | Limited | Available | |
| 3XL | Inventory Unavailable | — | |
| 4XL | Inventory Unavailable | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 8.8 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Athletic/Fitted
- Sizes
- S–4XL
- Colors
- 6
- Country of origin
- Honduras
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Athletic/Fitted fit, cut for men's wear · sizes S–4XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|
| Body Length | 27 3/4 | 28 1/4 | 29 | 29 3/4 | 30 1/2 | 31 1/4 | 32 |
| Chest Circumference | 43 | 45 | 46 1/2 | 48 1/2 | 50 1/2 | 52 1/2 | 54 1/4 |
Fabric and construction
Manufacturer highlights
- 8.8 oz./yd², 100% polyester brushed fleece
- Athletic fit
- Braided drawcord
- Flat lock seams
- Pouch pocket
- Left hem woven jock tag and ellipse transfer
- Reflective detail
About this blank
Oakley products purchased from us must be sold with embellishment. Re-selling from an unauthorized retail store, web site or any third party site (i.e., Amazon, Craigslist, eBay, WalMart, etc.) is strictly prohibited. Failure to adhere to these terms will result in loss of privilege to sell the brand.
Country of origin
Made in Honduras.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (9 vs 8.8 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (9 vs 8.8 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (9 vs 8.8 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (9 vs 8.8 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Brushed Finish
- A brushed finish uses wire-bristled rollers to lift a thick nap from fabric, most often the inside face of sweatshirt fleece, trapping air for extra warmth and softness.
- Athletic Fit
- Athletic fit is a T-shirt pattern with a fuller chest and shoulder cut that tapers down to a narrower waist, built for muscular or broad-shouldered builds.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.