Shown: Yellow
Berne ApparelStyle HVF021 · Hoodies
Men's Berne Hi-Vis Class 3 Lined Hooded Sweatshirt
A blank hooded sweatshirt from the Berne Apparel line, offered in Yellow and sizes M–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% polyester at 9 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Yellow
Yellow
Available sizes
Availability — Yellow
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | In Stock | — | |
| 4XL | In Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 9 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Oversized
- Sizes
- M–4XL
- Colors
- 1
- Country of origin
- Pakistan
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Oversized fit, cut for men's wear · sizes M–4XL.
Garment measurements in inches, laid flat.
| Measurement | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|
| Body Length | 29 | 30 | 31 | 32 | 33 | 34 |
| Chest Width (Laid Flat) | 22 1/2 | 24 1/2 | 26 1/2 | 28 1/2 | 30 1/2 | 32 1/2 |
| Sleeve Length | 36 3/4 | 37 1/2 | 38 1/4 | 39 | 39 3/4 | 40 1/2 |
Fabric and construction
Manufacturer highlights
- 9 oz./yd², 100% polyester fleece
- 5 oz./yd², 100% polyester mesh lining
- Double-lined three-piece hood
- Nylon front zipper
- 2" reflective tape
- Oversized front pockets
- Knit cuffs and waistband
- ANSI/ISEA 107 2015 Type R Class 3 certified
Country of origin
Made in Pakistan.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (9 vs 9 oz)
- · Oversized fit
- · Same fabric: 100% polyester
- · Similar weight (9 vs 9 oz)
- · Oversized fit
- · Same fabric: 100% polyester
- · Similar weight (9 vs 9 oz)
- · Oversized fit
- · Same fabric: 100% polyester
- · Similar weight (8.8 vs 9 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Mesh
- Mesh is an open-construction knit fabric with visible holes for airflow, used in athletic jerseys, cap back panels, and moisture-wicking gear.
- Nylon
- Nylon is a synthetic fiber known for strength and a slick, low-friction surface, common in jackets and bags, that requires specialized inks or transfers to hold a print.