Shown: Black
North EndStyle NE105 · Hoodies
Unisex JAQ Stretch Performance Hooded Long Sleeve T-Shirt
A blank hooded sweatshirt from the North End line, offered in 4 colors and sizes XXS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 69/26/5 polyester/lycoell/spandex jersey at 5.3 oz/yd²
- 8-size run (XXS–3XL)
- Fair Labor Association
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 4— Black
Black
Carbon
Classic Navy
Platinum
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XXS | Limited | — | |
| XS | Low Stock | — | |
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | Limited | — | |
| 2XL | Limited | — | |
| 3XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 69/26/5 polyester/lycoell/spandex jersey
- Fabric weight
- 5.3 oz/yd²
- Fabric type
- jersey
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- XXS–3XL
- Colors
- 4
- Country of origin
- Bangladesh
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes XXS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XXS | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|---|
| Body Length | 27 | 27 1/2 | 28 | 29 | 30 | 31 | 32 | 33 |
| Chest Width (Laid Flat) | 17 | 18 1/2 | 20 | 21 1/2 | 23 | 25 | 26 1/2 | 28 1/2 |
| Sleeve Length | 33 | 33 1/2 | 34 | 35 | 36 | 37 | 38 | 39 |
Fabric and construction
Manufacturer highlights
- 5.3 oz./yd² (US), 8.8 oz./L yd (CA), 69/26/5 polyester/lycoell/spandex jersey
- The fiber lyocell from Lenzing® is a sustainably sourced, renewable and bio-degradable botanic fiber
- Superior performance combined with a soft handfeel
- Fabric built with stretch for all day comfort
- Active fit
- Moisture wicking performance pulls sweat away from the skin to keep you dry and comfortable
- Antimicrobial performance properties fight odor-causing bacteria to keep your gear fresher for longer
- Self-fabric cuffs
- Thumbhole on cuffs
- Dyed-to-match cover stitching throughout
- Lower inseam pockets
- The fiber lyocell from Lenzing® is a sustainably sourced, renewable and bio-degradable botanic fiber
- Responsible Supplier: this product was made in a facility that is FLA certified
Country of origin
Made in Bangladesh.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Similar weight (5 vs 5.3 oz)
- · Covers XS–4XL
- · Similar weight (5.31 vs 5.3 oz)
- · Covers XS–3XL
- · Similar weight (5.4 vs 5.3 oz)
- · Similar weight (5.3 vs 5.3 oz)
- · Covers XS–3XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Lyocell
- Lyocell is a rayon-family fiber made from wood pulp using a closed-loop solvent process that recovers over 99% of its chemicals, prized for a silky, eco-friendlier finish.
- Moisture-Wicking Fabric
- Moisture-wicking fabric, almost always polyester, pulls sweat away from skin to its outer surface for fast evaporation, unlike absorbent cotton.